Search
Skip to Search Results- 1Abraham, Tinu M
- 1Adegoroye, Adebukola
- 1Afshar, Shima
- 1Ali, Babkir SM
- 1Amani, Mohammad Javad
- 1Amoako, Kwaku Akrofi
-
Spring 2016
During the extraction of crude oil or bitumen, stable water-in-oil emulsions are inevitably formed. The emulsified water contains chloride ions and other organic acidic compounds that cause severe corrosion problems to the downstream plant equipment, creating operational and safety issues and...
-
Spring 2015
The minable oil sands extraction process can be understood on a scale of a single oil sand grain. When the oil sand ore is mixed with warm water, each sand granule is initially covered with bitumen film which ruptures under the composite effect of shear and interfacial forces, while water...
-
Fall 2013
This dissertation examines the relationship between Canadian newspapers, the development of Alberta’s oil sands, and neoliberalism. It uses both content and discourse analysis to analyze coverage of oil sands development in six English-Canadian newspapers between October 1, 2005 and October 31,...
-
Fall 2011
The growing interest in the oilsands bitumen reserves, a large portion of which is unattainable by current industrial processes, has generated a need for an improved process for oilsands extracting and upgrading. The effects of using chabazite as a catalyst for cracking and upgrading of oilsands...
-
Challenges of utilizing municipal compost as an amendment in boreal forest reclamation subsoil material
DownloadFall 2018
Forest reclamation sites are often located in areas not suited for agriculture and therefore have poor soil conditions. To assist in the rehabilitation of forests on these types of sites, organic amendments can be used. Close to large urban centers, compost derived from municipal organic waste...
-
Fall 2023
At the heart of heavy oil and bitumen upgrading, thermal conversion technologies are found. One such process is visbreaking where bitumen is thermally converted into lighter materials. However, the conversion by visbreaking is limited by the onset of the formation of solid carbonaceous materials...
-
Fall 2011
Fluorescence technology was examined as an analytical tool for identifying naphthenic acids in process-affected water. The fluorescence signal from process-affected water was narrowed down to the extractable organic acid fraction, known to contain naphthenic acids. A characteristic intensity...
-
Spring 2010
Understanding mineralogy and surface properties of fine solids is vital in oil sands processing and tailings management. Fine solids in oil sands are often contaminated by tightly bound organic matter (OM) originally or during hydrocarbon removal, thereby increasing surface hydrophobicity and...
-
Fall 2013
Hydraulic transport is commonly employed in the mining industry to transport crushed ore to a processing facility. Dense slurry flows inflict heavy wear on pipes, leading to significant process downtime and loss of revenue. Several factors have been identified as key contributors to pipe wear. ...
-
CO2-Responsive Surfactants for Enhancing Heavy Oil Recovery: from Fundamentals to Bench-Scale Demonstrations in Canadian Oil Sands Extraction
DownloadSpring 2020
Interfacial properties at the oil-water interface are of key importance to various operations in the petroleum industry, especially in the aqueous-based heavy oil recovery process. However, different operation stages often require different interfacial properties, which could be conflicted with...