Search

Spring 2014

Guest, Stuart Dan

Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...

Fall 2009

Pepin, Joel

For the manufacture of higher strength pipelines to be feasible, a better understanding of the effects of welding on toughness is necessary. Bevel submerged arc welds were performed on X80 grade steel. The subsequent Charpy V-notch (CVN) test results indicated that the notch placement in the...

Spring 2017

McIntosh, Cory L

Heat distribution measurements in Gas Metal Arc Welding (GMAW) were concurrently measured at the cathode and anode giving increased insight and prediction capabilities. A calorimeter and water cooled cathode were used to determine energy partitions in GMAW for various electrodes, currents,...

Fall 2011

Scott, Kevin

A calorimeter for the deposition of metal during free-flight GMAW was developed for the purpose of measuring droplet heat content in Ni/WC tubular wires. By approximating the thermal gradients within the calorimeter to be second order polynomials the energy transferred to the calorimeter by the...

Spring 2014

Borle, Steven D

Microstructural features of chromium carbide overlays (CCOs) were examined in this work. It was found that the microstructures can contain unmelted alloy powders. It was also shown that the structures of the primary M7C3 carbides are long hexagonal rods. Change in the microstructure from the top...