Search
Skip to Search Results- 115Department of Chemical and Materials Engineering
- 35Department of Civil and Environmental Engineering
- 18Department of Renewable Resources
- 14Department of Mechanical Engineering
- 9Department of Earth and Atmospheric Sciences
- 7Department of Biological Sciences
- 18Xu, Zhenghe (Chemical and Materials Engineering)
- 8Liu, Qingxia (Chemical and Materials Engineering)
- 6De Klerk, Arno (Chemical and Materials Engineering)
- 5Lipsett, Michael (Mechanical Engineering)
- 5Masliyah, Jacob (Chemical and Materials Engineering)
- 5Zeng, Hongbo (Chemical and Materials Engineering)
-
Analysis of the cost effectiveness of alternative policies and technologies to manage water extractions by the oil sands sector along the lower Athabasca River
DownloadFall 2009
The Lower Athabasca Water Management Framework limits water extractions by the oil sands industry near Fort McMurray, Alberta. To increase water-use efficiency and minimise the cost of water restrictions, several policy and technology options were developed and assessed using quantitative and...
-
Application of coagulation-flocculation process for treating oil sands process-affected water
DownloadFall 2011
Oil Sands Process-Affected Water (OSPW) is generated from oil sands operation processes such as mining, extraction, and upgrading. Currently, accumulated OSPW is temporarily stored in tailings ponds which are toxic to the environment and must be treated for either reuse or safe discharge in the...
-
Spring 2015
A multi-purpose settling column was designed to determine settling rate and sediment height allowing the in-situ measurement of yield stress and drainage without disturbing the sediment particle network. The settling column was applied to studying flocculation/densification of model oil sands...
-
Fall 2014
The extraction of bitumen from oil sands in Alberta, Canada, leads to the creation of tailings that are contained in lake-sized ponds under zero discharge policy. Stratification of tailings over time leads to the formation of mature fine tailings (MFT), an oil based emulsion containing residual...
-
Applications of Remote Hyperspectral Sensing in the Characterization of Alberta's Oil Sands Tailings
DownloadSpring 2016
The bitumen production from oil sands surface-mining operations produces large volumes of mineral wastes called tailings. Characterization of the oil sands tailings is of importance to monitor their state for trafficability and reclamation issues, to assess the tailings operation performance, and...
-
Fall 2012
This thesis explored the properties of asphaltene nano-aggregates in crude oil and toluene based solutions and fouling at process furnace temperatures, and the links between these two phenomena. The link between stability of asphaltenes at ambient conditions and fouling at the conditions of a...
-
Fall 2016
Athabasca oil sands contain 8 to 14% bitumen and are recovered using surface mining or steam assisted gravity drainage (SAGD). During primary upgrading of bitumen, the vacuum residuum from the distillation column is sent to the solvent de-asphalting unit where a paraffinic solvent is used to...
-
Fall 2015
Canadian oilsands bitumen contains one of the highest amounts of asphaltenes (16-20 wt %) among all crude oils. Asphaltenes are the lowest value fraction of bitumen. It differs from the other fractions of bitumen because of its insolubility in paraffinic solvents. Asphaltenes are insoluble in...
-
Fall 2020
Asphalt pavements are the most common type of pavements in North America. Increasing traffic demand, harsh weather conditions, and the tendency for infrastructure operators to reduce the cost (and, therefore, the frequency) of maintenance are the major reasons for asphalt performance improvement...