Search
Skip to Search Results- 1Afshar, Shima
- 1Ahmed, Nirob
- 1Amani, Mohammad Javad
- 1Amundarain, Jesus
- 1Anas Khalil Sidahmed
- 1Ansari, Nesma Nasir
-
Fall 2013
Bitumen, as one of the most important unconventional sources of energy, has long been an attractive source for production of liquid fuels. It is important to improve the yield and quality of the useful products resulting from bitumen upgrading processes so that the best outcome can be achieved...
-
Spring 2015
This thesis presents a thorough examination of the corrosion and fouling behaviour of crude oil at refining conditions on industrially applicable heat transfer surfaces. The depletion of light sweet crude oil reserves means that the processing of ever heavier and more sour crude oils is...
-
Fall 2014
The formation of stable water-in-oil emulsions during bitumen extraction poses problems for water separation from diluted bitumen, which leads to equipment corrosion and catalyst fouling in downstream operations. Demulsifiers are used to break the stable emulsions and assist the separation of...
-
Spring 2016
The tendency of asphaltenes to aggregate in crude oil is observed at SATP and is enhanced at elevated temperatures. At these conditions, asphaltenes aggregation is a problem as it will ultimately lead to mesophase formation, a precursor of coke, known for causing plugging and fouling of...
-
Development of an Experimental Apparatus for Studying the Effects of Acoustic Excitation on Viscosity
DownloadFall 2012
An experimental apparatus was developed capable of measuring changes in fluid viscosity occurring due to acoustic stimulation. Controls allowed measurements at simulated oil sand reservoir pressures and temperatures with near real-time data visualization. Calibration was performed...
-
Development of Solvent Selection Criteria Based on Diffusion Rate, Mixing Quality, and Solvent Retrieval for Optimal Heavy-Oil and Bitumen Recovery at Different Temperatures
DownloadFall 2015
Heavy-oil and bitumen recovery requires high recovery factors to offset the extreme high cost of the process. Attention has been given to solvent injection for this purpose and it has been observed that high recoveries are achievable when combined with steam injection. Heavier (“liquid”) solvents...
-
Fall 2020
Concerns over the environmental impacts of thermal production methods for bitumen and heavy oil have led to the exploration of alternative technologies including solvent-assisted production methods. While solvent-assisted production methods have been studied extensively, apparent diffusion rates...
-
Dynamic Demulsification Mechanism of Asphaltene-Stabilized Water-in-Oil Emulsions by Ethylcellulose
DownloadFall 2015
In previous studies, nontoxic and biodegradable ethylcellulose (EC) was shown to be capable of breaking water-in-diluted bitumen emulsions. Nevertheless, the demulsification mechanism of EC has not been correlated to its effect on the physical properties of stabilizing interfacial asphaltene...
-
Fall 2009
The extraction of bitumen (heavy oil) from the oil sands is predominantly achieved through a water-based technology. This involves a slurrying process, typically called conditioning, which is categorized into three equally important steps: bitumen-sand liberation, bitumen coalescence, and...
-
Spring 2014
In bitumen recovery from oil sands, a percentage of the bitumen is lost to tailings. The effect of fugitive bitumen on fines settling and consolidation in tailings ponds remains controversial. In the current study, the settling performance of mature fine tailings (MFT) in response to flocculant...