Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Ahmed, Nirob
- 1Amani, Mohammad Javad
- 1Amundarain, Jesus
- 1Anas Khalil Sidahmed
- 93Department of Chemical and Materials Engineering
- 21Department of Civil and Environmental Engineering
- 9Department of Mechanical Engineering
- 7Department of Earth and Atmospheric Sciences
- 5Department of Renewable Resources
- 4Department of Chemistry
- 12Xu, Zhenghe (Chemical and Materials Engineering)
- 5De Klerk, Arno (Chemical and Materials Engineering)
- 5Liu, Qingxia (Chemical and Materials Engineering)
- 5Zeng, Hongbo (Chemical and Materials Engineering)
- 3Gray, Murray (Chemical and Materials Engineering)
- 3Gupta, Rajender (Chemical and Materials Engineering)
-
An Examination of the Effect of Diluent on Microbial Dynamics in Oil Sands Tailings and the Mechanistic Insight on Carbon Dioxide-mediated Turbidity Reduction in Oil Sands Surface Water
DownloadFall 2019
Oil sands fluid fine tailings (FFT) are comprised of sand, silt, clay, residual organics, salt, trace metals and process-affected water (OSPW). In order to accommodate and remediate large amounts of FFT, a full-scale demonstration pit lake, where FFT was capped with a mixture of OSPW and fresh...
-
Fall 2014
The extraction of bitumen from oil sands in Alberta, Canada, leads to the creation of tailings that are contained in lake-sized ponds under zero discharge policy. Stratification of tailings over time leads to the formation of mature fine tailings (MFT), an oil based emulsion containing residual...
-
Applications of Remote Hyperspectral Sensing in the Characterization of Alberta's Oil Sands Tailings
DownloadSpring 2016
The bitumen production from oil sands surface-mining operations produces large volumes of mineral wastes called tailings. Characterization of the oil sands tailings is of importance to monitor their state for trafficability and reclamation issues, to assess the tailings operation performance, and...
-
Fall 2012
This thesis explored the properties of asphaltene nano-aggregates in crude oil and toluene based solutions and fouling at process furnace temperatures, and the links between these two phenomena. The link between stability of asphaltenes at ambient conditions and fouling at the conditions of a...
-
Fall 2016
Athabasca oil sands contain 8 to 14% bitumen and are recovered using surface mining or steam assisted gravity drainage (SAGD). During primary upgrading of bitumen, the vacuum residuum from the distillation column is sent to the solvent de-asphalting unit where a paraffinic solvent is used to...
-
Fall 2015
Canadian oilsands bitumen contains one of the highest amounts of asphaltenes (16-20 wt %) among all crude oils. Asphaltenes are the lowest value fraction of bitumen. It differs from the other fractions of bitumen because of its insolubility in paraffinic solvents. Asphaltenes are insoluble in...
-
Fall 2020
Asphalt pavements are the most common type of pavements in North America. Increasing traffic demand, harsh weather conditions, and the tendency for infrastructure operators to reduce the cost (and, therefore, the frequency) of maintenance are the major reasons for asphalt performance improvement...
-
Spring 2011
Flotation process is mineral processing technique used for separating valuable minerals from the gangue. The research presented in this thesis deals with assessing features that can help in measuring the performance (observing) bitumen flotation process and modeling damage in flotation units. A...
-
Spring 2013
The self-association properties of two model compounds of asphaltene, 2,6-bis[2-(pyren-1-yl)ethyl]pyridine (PyPPy, C41H29N) and 2,6-bis[2-(phenanthren-9-yl)ethyl]pyridine (PhPPh, C37H29N), were studied in deuterated chloroform and deuterated methylene chloride. 1H NMR spectroscopy titration...
-
Fall 2011
Oxidative desulfurization of oil sands bitumen as pre-refining methodology to improve bitumen quality in the absence of catalysts was studied. It has potential advantages such as employing a cheap reagent (air) and moderate processing conditions (<180 °C, autogenous pressure). The specific aims...