Search
Skip to Search Results- 1Abtahi, Shaghayegh
- 1Aghaie, Ermia
- 1Ahmed, E.
- 1Ahmed, Ezz Q
- 1Arango Vasquez,Daniela
- 1Asha, Anika Benozir
- 30Graduate and Postdoctoral Studies (GPS), Faculty of
- 30Graduate and Postdoctoral Studies (GPS), Faculty of/Theses and Dissertations
- 2Mechanical Engineering, Department of
- 1Chemical and Materials Engineering, Department of
- 1Chemical and Materials Engineering, Department of/Research Articles and Materials (Chemical and Materials Engineering)
- 1Mechanical Engineering, Department of/Journal Articles (Mechanical Engineering)
- 5Chen, Weixing (Chemical and Materials Engineering)
- 5Luo, Jingli (Chemical and Materials Engineering)
- 2Li, Dongyang (Chemical and Materials Engineering)
- 2Mitlin, David (Chemical and Materials Engineering)
- 2Thundat, Thomas (Chemical and Materials Engineering)
- 1Al-Hussein, Mohamed (Civil and Environmental Engineering)
-
Spring 2011
Stainless steel is one of the most commonly used materials in most industries. Excellent corrosion resistance of stainless steel is due to the formation of an oxide film on the surface (passive film), which protects the material from continuous corrosion attacks. When subjected to an attack...
-
Fall 2019
An evaluation of the resistance of two different X70 pipeline steels to hydrogen-induced cracking in severe (pH 2.7 and 1 atm H2S) and intermediate (pH 5.5 and 1 atm H2S) sour service conditions was undertaken. The two steels used in this work, X70-X and X70-B, were selected based on their...
-
Functionalization and Characterization of Metal Oxide Coatings of Stainless Steel and Silica Nanoparticles
DownloadSpring 2013
The development of tolerogens, fabricated devices eliciting tolerance toward incompatible donor ABO antigens in implant patients, is the ultimate goal of this project. This would permit ABO incompatible organ transplants, increase the donor pool for patients, increase efficiency in the use of...
-
Growth behavior of surface cracks in pipeline steels exposed to near-neutral pH environments
DownloadFall 2013
This study is part of a larger study designed to help a consortium of pipeline operators replace current (very expensive) approaches to managing stress corrosion cracking (SCC) concerns in near-neutral pH (NNPH) environments with mathematical models that predict SCC growth rates. This could...
-
Investigation of Corrosion and Crack Morphology Behavior under Disbonded Coatings on Pipelines
DownloadFall 2015
Coating disbondment on pipelines is a common phenomenon that leads to exposure of the pipeline metal to the surrounding soil and ground water solutions. The exposure of pipelines to those corrosive environments is associated with development of corrosion and Stress Corrosion Cracking (SCC) on the...
-
Investigation of Highly Corrosion Resistant and Electrically Conductive Coatings on Metal Bipolar Plates Used in Polymer Electrolyte Membrane Fuel Cell
DownloadSpring 2019
There are apparent technical and economic advantages to replace carbon-based bipolar plates using metal bipolar plates (MBP) for applications in polymer electrolyte membrane fuel cell (PEMFC). However, MBP suffers from corrosion in the acidic environment of PEMFC, and the subsequently formed...
-
Investigation of Surface Crack Growth Behaviour Under Variable Pressure Fluctuations in Near-Neutral pH Environments
DownloadFall 2017
The goal of this investigation was to study the corrosion fatigue behaviour and mechanisms of surface cracks, semi-elliptical in shape, when exposed to near-neutral pH environments conducive to the environments experienced in the field. To better simulate field conditions, while avoiding the...
-
Surface modification of zirconium implants via electrochemical anodization and wet chemical techniques
DownloadFall 2011
Metals such as titanium (Ti) and zirconium (Zr) have been widely applied in the orthopaedic and orthodontic field for construction of joint replacement prostheses and teeth implants due to their lower cytotoxicity, excellent mechanical properties, and corrosion resistance. However, the current...
-
Spring 2017
Magnesium remarkably deserves considerable interest from industry especially transportation sector because of its high strength to weight ratio. However, poor wear resistance and low corrosion resistance of magnesium are barriers to extend use of its alloys. Yttrium is one of rare-earth elements...
-
The Role of Sulfur Species in Establishing the Corrosion Reactions in Refinery Metallurgies
DownloadSpring 2016
This thesis is focused on the studying the role that model sulfur-containing molecules have in corrosion reactions on relevant metallurgies. This was done by using a design of experiments where a number of sulfur-based compounds were reacted with various metallurgies. The 8 model sulfur compounds...