Search
Skip to Search Results- 2Wilkins, Nicholas S.
- 1Aftergood, Olivia SR
- 1Alam, Monisha
- 1Alizadeh, Saeid
- 1An, Zhexuan
- 1Awad, Rania
- 24Department of Chemical and Materials Engineering
- 22Department of Civil and Environmental Engineering
- 5Department of Renewable Resources
- 2Department of Chemistry
- 2Department of Earth and Atmospheric Sciences
- 2Department of Mechanical Engineering
- 8Hashisho, Zaher (Civil and Environmental Engineering)
- 4Rajendran, Arvind (Chemical and Materials Engineering)
- 3Chang, Scott (Renewable Resources)
- 2Kuznicki, Steven (Chemical and Materials Engineering)
- 2Mohamed Gamal El-Din (Civil and Environmental Engineering)
- 2Rajendran, Arvind (Department of Chemical and Materials Engineering)
-
Adsorptive Removal of CO2 by Amine Functionalized Sorbents: Experimental and Kinetics Study
DownloadFall 2012
Adsorption processes using functionalized ordered mesoprous silica sorbents have shown a great potential for post-combustion CO2 capture from flue gas. In this work an experimental and theoretical investigation was conducted on the adsorptive removal of CO2 onto amine functionalized mesoporous...
-
Spring 2014
Magnowski, Nicholas Brooks Kenneth
The natural gas industry recognises that the need for removal of CH4 from C2H6 feedstock C2H4 production and utilization. CH4 being a contaminant in the production of C2H4 and furthermore in the production of polymers from C2H4. Dethanizers in gas processing plants are energy intensive and...
-
Fall 2009
The objective of this research was to develop new molecular sieve materials and to examine their applications in adsorptive gas separation processes. Several techniques to modify zeolite molecular sieve materials were developed, including a new pore size control mechanism and novel surface...
-
Spring 2010
Poor settling of solids increases land requirement for tailings containment and imposes severe constraints on the water balance. Consequent to these considerations, the alternating current electrocoagulation (AC/EC) technique emerged as a candidate for enhancing the settling behaviour of...
-
An Examination of the Effect of Diluent on Microbial Dynamics in Oil Sands Tailings and the Mechanistic Insight on Carbon Dioxide-mediated Turbidity Reduction in Oil Sands Surface Water
DownloadFall 2019
Oil sands fluid fine tailings (FFT) are comprised of sand, silt, clay, residual organics, salt, trace metals and process-affected water (OSPW). In order to accommodate and remediate large amounts of FFT, a full-scale demonstration pit lake, where FFT was capped with a mixture of OSPW and fresh...
-
Fall 2013
In the development of a numerical model for the water cycle on Mars, adsorption of water vapour in the Martian regolith acts as a significant sink and retards the transport of mass. Adsorption on Mars cannot be studied directly, so a numerical model was created, and a diffusion sorption...
-
Fall 2017
Water contamination by ammonium ions presents huge risks to the ecosystems. This work evaluated the potential application of digested sludge pyrolyzed biochar on ammonium removal. Anaerobic digester sludge was collected from a municipal wastewater treatment plant in Alberta, Canada and pyrolyzed...
-
Application of manure from cattle fed with different diets affects soil properties and greenhouse gas emissions
DownloadSpring 2019
Cattle production contributes the largest portion of livestock agricultural greenhouse gas (GHG) emissions in Canada mostly in the form of methane (CH4). Efforts to reduce CH4 emissions have led to modification of diet composition for livestock, resulting in a corresponding change in manure...
-
Boxed-in: Comparing Algorithms for Box-flight Mass-Balance Greenhouse Gas Flux Measurements from Mineable and In Situ Oil Sands Developments
DownloadSpring 2022
To combat global warming, Canada has committed to reducing greenhouse gases (GHGs) 40-45% below 2005 emission levels by 2025. Monitoring emissions and deriving accurate inventories are essential to reaching these goals. GHGs can be measured at a small scale, often using ground measurements which...
-
Characterization of copper supported on titanosilicates for room temperature H2S adsorption
DownloadSpring 2012
Hydrogen sulfide (H2S) is a major contaminant of industrial gas streams. Amongst the various methods used for its removal, adsorption by metal oxides is the most promising. Copper oxide (CuO) is shown to have superior H2S removal capability at room temperature. H2S removal at room...