Search
Skip to Search Results- 24Nobes, David (Mechanical Engineering)
- 5Lipsett, Michael (Mechanical Engineering)
- 2Fleck, Brian (Mechanical Engineering)
- 2Mitra, Sushanta (Mechanical Engineering)
- 1Ayranci, Cagri (Mechanical Engineering)
- 1Ayranci, Cagri (Mechanical Engineering)
- 1Agrawal, Yogesh K
- 1Alberti, Devin
- 1Behboodi, Fahimeh
- 1Bussiere, Mathew
- 1Comyn, Graeme Ian
- 1Der, Jason R.
-
Estimation of the Evaporation Rate of an Isolated Water Microdroplet Subjected to Infrared Radiative Heating
DownloadFall 2014
A combined numerical-experimental investigation was performed to study the influence of infrared radiation on the evaporation of a single-component droplet in the range between 10 and 50 micrometers, under different environmental conditions of relative humidity and temperature of air. A numerical...
-
Comprehensive Study of the Bioconversion of Coal Using Laboratory Core Flooding Experiments
DownloadSpring 2014
Core flooding experiments were performed to understand in-situ coal bioconversion process. Subbituminous coal particles packed inside a biaxial core holder was inoculated with microbial culture and was continuously flooded with mineral salts medium and nitrogen rich nutrient solution....
-
Theoretical and Experimental Investigation of Hydrocyclone Performance and the Influence of Underflow Pumping Effect
DownloadFall 2015
Centrifugal separators have many applications in industry. Comprehensive information based on performance and energy consumption for a detailed comparison between different types of centrifugal separators is essential to allow design optimization and is the focus of this work. Equivalent...
-
Fall 2015
An investigation of the velocity profile in a microscale (<5mm) channel using micro PIV technique is presented. Measuring the velocity profile in the microchannel becomes increasingly important with the improved attention to microscale devices. Theory dictates that flow in the channel has a...
-
Fall 2016
There are numerous examples of dispersed turbulent two-phase flows in engineering and environmental processes. In particular, dispersed solid-liquid flows, also known as slurry flows, have many industrial applications such as transportation of coal, ore, and oil sands. Slurry transportation...
-
An Investigation of The Pressure Loss Characteristics for Highly Viscous Fluid Flow Through Narrow Slots
DownloadSpring 2016
An investigation was conducted to study the pressure loss characteristics of a highly viscous fluid flow across a sudden contraction. The objective of this work was to have a better understanding about the fluid flow phenomena across a narrow slot, which resembles the produced oil flow through...
-
Fall 2019
Generating functional parts using additive manufacturing (AM) has many challenges. These can be material- and/or process-based. This is especially true when the produced part is required to withstand or be sealed for pressure due to the potential air gaps inherent to AM processes that generate...
-
Parameter Optimization of a Low Temperature Difference Gamma-Type Stirling Engine to Maximize Shaft Power
DownloadSpring 2019
An investigation was performed with three main objectives. Determine the configuration andoperating parameter of a low temperature difference Stirling engine (LTDSE) that would result inthe maximum shaft power. Calculate the mean West number for LTDSEs and compare it to themean West number for...
-
Fall 2020
Ex Vivo Heart Perfusion (EVHP) preserves a donor heart’s natural beating function outside of the body. The purpose of this work was to study the influence of mock aorta properties on pump performance in a mechanical EVHP system. Previous work has shown potential benefits on pump workload by...
-
Fall 2020
In this thesis, the challenges involved with large-scale Fused Filament Fabrication (FFF) 3-dimensional (3D) printing is explored through an industrial application in which a cantilever chair is produced as a case study. The chair is designed in SOLIDWORKS® in which easy variability and complex...