Search
Skip to Search Results- 1Afacan, Christopher
- 1Amani, Mohammad Javad
- 1Arora, Nitin
- 1Bazoubandi, Behnaz
- 1Davey, Stepheney
- 1Gong, Jihua
- 3Soares, Joao (Chemical and Materials Engineering)
- 3Xu, Zhenghe (Chemical and Materials Engineering)
- 2Liu, Qi (Chemical and Materials Engineering)
- 2Soares, João B. P. (Chemical and Materials Engineering)
- 2Xu, Zhenghe (Chemical Engineering)
- 1Co-supervisor: Dr. Jacob H. Masliyah, Dept of Chemical and Materials Engineering
-
The Role of High Molecular Weight Polyethylene Oxide in Reducing Quartz Gangue Entrainment in Chalcopyrite Flotation by Xanthate Collectors
DownloadFall 2011
Fine particles pose two challenging problems to all mineral processors around the world today. The problems are the inefficient collection of hydrophobic particles (low recovery), and mechanical/hydraulic entrainment of hydrophilic gangue particles (low concentrate grade). Extensive research has...
-
Fall 2011
The impact of mixing on diluted bitumen de-watering is studied in two stages using a fractional factorial design of experiments. The first stage evaluates the relative effects of bulk demulsifier dosage, local maximum energy dissipation, and mixing time. The second stage of experiments evaluates...
-
Fall 2012
Built on the established success of Al-PAM, an in-house synthesized, organic-inorganic hybrid polymer, for flocculation and filtration of fresh oil sands extraction tailings, this research is to understand working mechanism of Al-PAM, focusing on the effect of Al-PAM properties (molecular weight...
-
Study on Adsorption of Inorganic-organic Hybrid Polymers and Flocculation of Oil Sands Tailings
DownloadSpring 2013
Two inorganic-organic hybrid polymers, Al(OH)3-polyacrylamide (Al-PAM) and Fe(OH)3-polyacrylamide (Fe-PAM) were synthesized and used in flocculating model tailings (5 wt% kaolin suspensions) and laboratory extraction tailings. For comparison, a commercial anionic flocculant, partially hydrolyzed...
-
Spring 2013
The research was conducted to investigate effect of hydrodynamic conditioning on the flocculation of the oil sands fine tailings. The main focus was the effect of shearing on the structure of flocculated aggregates and the extent of reflocculation occurring upon cessation of shearing. An...
-
Phase Behavior and Thermophysical Properties of Athabasca Bitumen and Athabasca Bitumen + Toluene Mixtures in Near-critical Water
DownloadSpring 2014
The phase behavior and thermophysical properties of heavy hydrocarbons + water at elevated temperatures underpins development and implementation of coordinated production and refining processes, where for example, bitumen is produced by a SAGD method (steam assisted gravity drainage) and the...
-
Spring 2014
In bitumen recovery from oil sands, a percentage of the bitumen is lost to tailings. The effect of fugitive bitumen on fines settling and consolidation in tailings ponds remains controversial. In the current study, the settling performance of mature fine tailings (MFT) in response to flocculant...
-
Extending Depletion Flocculation Phase Behavior Models to Partially Soluble and Aggregating Colloids—Asphaltenes
DownloadFall 2015
Mixtures of colloids + non-adsorbing polymers + good solvents are well known to exhibit multiphase behaviors that are driven by the depletion flocculation mechanism where one phase, designated a colloid gas, is largely comprised of polymer and solvent, while the other phase, designated a colloid...
-
Flocculation and dewatering of kaolinite suspensions and oil sands mature fine tailings using dual polymers
DownloadSpring 2015
The development of a method to consolidate and dewater Athabasca oil sands mature fine tailings (MFT) is one of the major challenges facing Alberta’s oil sands industry. This thesis presents studies performed on the flocculation and dewatering of kaolinite suspensions (the major clay component...
-
Mechanisms of Aggregation and Separation of Water and Solids from Bitumen Froth using Cluster Size Distribution
DownloadFall 2016
The large-scale corrosion and equipment damage caused by water and solids respectively in bitumen froth necessitate their removal using various methods. This study is aimed at understanding how water and solids aggregate (water-water, water-solid and solid-solid) in bitumen froth and what the...