Search
Skip to Search Results- 1Badiozamani Tari Nazari, Mohammad Mahdi
- 1Baker, Kathleen E.N.
- 1Beier, Nicholas A
- 1Brown, Lisa D
- 1Collins, Catherine
- 1Entezari Najafabadi, Iman
- 12Department of Chemical and Materials Engineering
- 8Department of Civil and Environmental Engineering
- 1Department of Biological Sciences
- 1Department of Earth and Atmospheric Sciences
- 1Department of Electrical and Computer Engineering
- 1Department of Mechanical Engineering
- 2Soares, Joao (Chemical and Materials Engineering)
- 1Beier, Nicholas (Civil and Environmental Engineering)
- 1Beier,Nicholas
- 1Belosevic, Miodrag (Biological Sciences)
- 1Choi,Phillip (Chemical and Materials Engineering)
- 1Dr. Hooman Askari-Nasab (Department of Civil and Environmental Engineering, University of Alberta)
-
Spring 2010
Commercial Magnafloc 1011and in-house synthesized Al-PAM were used as flocculants for model tailings, laboratory extraction tailings and tailings from paraffin froth treatment unit. The polymers were tested for their flocculation ability in settling and filtration. For model tailings, both...
-
Application of coagulation-flocculation process for treating oil sands process-affected water
DownloadFall 2011
Oil Sands Process-Affected Water (OSPW) is generated from oil sands operation processes such as mining, extraction, and upgrading. Currently, accumulated OSPW is temporarily stored in tailings ponds which are toxic to the environment and must be treated for either reuse or safe discharge in the...
-
Spring 2012
Tailing ponds in Northern Alberta has covered an area of 170 km2. Directive 074 issued in 2009 set stringent criteria for tailings reclamation. Freeze-thaw dewatering is one of the most promising approaches for dewatering MFT as one cycle of freeze-thaw can release up to 50% pore water. In this...
-
Spring 2013
The mining of oil sands ore and extraction of bitumen produces aqueous slurries containing bitumen, coarse sand and fine clays. The performance of key process units is highly dependent on the rheology of “carrier fluid”, which is comprised of the fine solids and water. Although viscosity is...
-
Biological Treatment of Naphthenic Acids and Other Organic Compounds in Oil Sands Process-Affected Waters
DownloadFall 2014
The Alberta oil sands contain one of the world’s largest reserves of oil - over 169 billion barrels of bitumen are economically recoverable with current extraction technologies. Surface mining, whereby the ore is extricated from the earth and bitumen is obtained via a hot water extraction...
-
An Integrated Optimization Model for Strategic Open-Pit Mine Planning and Tailings Management
DownloadFall 2014
Badiozamani Tari Nazari, Mohammad Mahdi
A strategic mine planning model determines the best order of extraction and destination of material over the mine-life, in a way that maximizes the net present value of the produced minerals. In case of oil sands open-pit mining, further processing of the extracted oil sands generates massive...
-
Spring 2015
This research aims to assist in the assessment of tailings management technologies through the development of a dynamic simulation model. The developed model (TMSim) incorporates the mine plan, various stages of dewatering including classification, pre- and post-deposition dewatering, and an...
-
Spring 2015
A multi-purpose settling column was designed to determine settling rate and sediment height allowing the in-situ measurement of yield stress and drainage without disturbing the sediment particle network. The settling column was applied to studying flocculation/densification of model oil sands...
-
A Study on the Effect of Temperature and Pressure on the Removal of Cyclohexane from Non-Aqueous Extraction Gangue
DownloadSpring 2015
Solvent based extraction has the potential to supplant the current hot water based extraction process as the industry standard method for recovering bitumen from mined oil sand. It has the potential for higher bitumen recovery that is less sensitive to the grade of oil sand ore being processed....
-
Development of compact fluorescent spectrometers and field deployable optical solids content monitoring devices
DownloadSpring 2015
Two techniques were used to develop industrial and environmental sensing devices: fluorescence spectrometry and light scatter. The focus of the thesis is to develop real-time, portable and economical sensors using these techniques for environmental detection and management of tailings slurries. A...