Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Baker, Kathleen E.N.
- 1Borle, Steven D
- 1Brandon, Jordan T
- 1Brown, Daniel M.
- 19Department of Chemical and Materials Engineering
- 13Department of Civil and Environmental Engineering
- 5Department of Renewable Resources
- 4Department of Earth and Atmospheric Sciences
- 2Department of Mechanical Engineering
- 1Chemical and Materials Engineering
- 4Mendez, Patricio (Chemical and Materials Engineering)
- 2Driver, Robert (Civil and Environmental Engineering)
- 2Ulrich, Ania (Department of Civil and Environmental Engineering)
- 2Zeng, Hongbo (Chemical and Materials Engineering)
- 1Amit Kumar (Mechanical Engineering)
- 1Askari-Nasab, Hooman (Civil and Environmental Engineering)
-
Finite Element Model of the Thermal Profile During Submerged Arc Welding with One and Two Electrodes
DownloadFall 2016
The submerged-arc welding (SAW) process is used extensively in the manufacturing of pipes. The heat flow introduced by the welding operation has a significant impact on the properties of both the weld metal and the heat affected zone (HAZ). The work presented in this thesis aims to develop a...
-
Spring 2019
This thesis contributes to the development of chronological and geological frameworks for the archaeological record of the mineable oil sands regions in northeastern Alberta, Canada. This area contains a rich pre-European contact archaeological record that has largely been documented through...
-
Fall 2011
A calorimeter for the deposition of metal during free-flight GMAW was developed for the purpose of measuring droplet heat content in Ni/WC tubular wires. By approximating the thermal gradients within the calorimeter to be second order polynomials the energy transferred to the calorimeter by the...
-
Spring 2021
The weld bead width and the penetration depth are major parameters that determine the mechanical strength of the weld joint. The analytic models, such as the Gaussian heat source model, may provide quite accurate estimations for the weld width and penetration; however, the model does not account...
-
Fall 2013
This thesis is a multi-modal exploration of the photographer-researcher as a methodological opportunity to gain multiple, collaborative and collective perspectives on living in relation to the Alberta oil sands zone of North America. Using participatory-photography with youth, this thesis is one...
-
Influence of Amendments and Soil Depth on Available Nutrients and Microbial Dynamics in Contrasting Topsoil Materials Used for Oil Sands Reclamation
DownloadFall 2015
As of December 2013, the cumulative area disturbed by oil sands mining in NE Alberta was 896 km2 out of an estimated final footprint of 4,800 km2 – all of which will require reclamation. Expensive handling costs and scarce soil resources necessitate judicious management and application of...
-
Life Cycle Assessment of Transportation Fuels from Canada’s Oil Sands through Development of Theoretical Engineering Models
DownloadFall 2014
Oil sands in Canada are significant in fulfilling the current and the future energy demands of North America. The development of these resources, besides the increased awareness in global carbon management, has given way to various policy regulations such as the Low Carbon Fuel Standard (LCFS)...
-
Fall 2011
One of the major issues in the current oil sands waste management techniques is a lack of a direct linkage between the long-term mine plans and the quantity of the tailings produced downstream. This research is focused on developing a linkage between oil sands long-term mine plans and the final...
-
Fall 2017
Welding is defined as the joining of metals with extreme heat, producing fumes, which consist of harmful metals and ultrafine particulates that may lead to detrimental health effects. Currently, air sampling is the primary method to determine welding fume exposure, but is not always feasible....
-
Methane Production and Emission Mitigation in Oil Sands Tailings Concurrent with Hydrocarbon Degradation under Nitrogen Limited Conditions
DownloadFall 2020
Alberta’s oil sands generate large volumes of tailings from bitumen ore processing. These tailings ponds produce biogenic methane, which can be measured across 60-80% of the tailings surface. Based on current surface area data and emissions studies, tailings ponds could account for 8% of Canada’s...