Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Baker, Kathleen E.N.
- 1Borle, Steven D
- 1Chen, Liang
- 1Guest, Stuart Dan
- 3Mendez, Patricio (Chemical and Materials Engineering)
- 1Choi,Phillip (Chemical and Materials Engineering)
- 1Dr. Patricio Mendez (Chemical and Materials Engineering)
- 1Etsell, Thomas (Chemical & Materials Engineering)
- 1Etsell, Thomas H, (Chemical and Materials Engineering)
- 1Gray, Murray (Chemical and Materials Engineering)
-
A Study on the Effect of Temperature and Pressure on the Removal of Cyclohexane from Non-Aqueous Extraction Gangue
DownloadSpring 2015
Solvent based extraction has the potential to supplant the current hot water based extraction process as the industry standard method for recovering bitumen from mined oil sand. It has the potential for higher bitumen recovery that is less sensitive to the grade of oil sand ore being processed....
-
Fall 2013
The high degree of variability of oil sands ores can be attributed to a mixture of different geological end members, i.e., estuarine sand, estuarine clay, marine sand and marine clay. This study focused on the mineralogy, especially of clay minerals, and toluene insoluble organic matter, referred...
-
Characterization of Clay Minerals in the Athabasca Oil Sands in Water Extraction and Nonaqueous Solvent Extraction Processes
DownloadFall 2011
Production of oil from the second largest oil deposit in the world, i.e., the Alberta oil sands containing approximately 13% of total proven oil reserves in the world (169.9 billion barrels), has been shown to be significantly influenced by clay minerals. Clay minerals in particular play a key...
-
Colloid Science of Sand Remediation: A Study Motivated by the Non-Aqueous Extraction of Bitumen from Oil Sands
DownloadFall 2014
The current water-based method of bitumen extraction requires withdrawal of fresh water from the Athabasca River — a practice which leads to the continual buildup of tailings ponds and other environmental concerns. As Alberta’s bitumen production is expected to more than double by 2020, there is...
-
Fall 2017
The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...
-
Fall 2014
The formation of stable water-in-oil emulsions during bitumen extraction poses problems for water separation from diluted bitumen, which leads to equipment corrosion and catalyst fouling in downstream operations. Demulsifiers are used to break the stable emulsions and assist the separation of...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...
-
Spring 2020
Albertan oil sands ores are becoming more difficult to process efficiently as the clay content of the ore increases and the grade of the ore worsens. A key to improving the extraction of bitumen from low-grade oil sands, thereby increasing the longevity of this critical resource, is reducing the...
-
Spring 2017
Heat distribution measurements in Gas Metal Arc Welding (GMAW) were concurrently measured at the cathode and anode giving increased insight and prediction capabilities. A calorimeter and water cooled cathode were used to determine energy partitions in GMAW for various electrodes, currents,...
-
Fall 2011
A calorimeter for the deposition of metal during free-flight GMAW was developed for the purpose of measuring droplet heat content in Ni/WC tubular wires. By approximating the thermal gradients within the calorimeter to be second order polynomials the energy transferred to the calorimeter by the...