Search

Fall 2015

Murphy, Jeffrey Nathaniel

2015 marks the 50th anniversary of Moore's law, which has described the exponential progress in semiconductor patterning technologies, enabling creation of smaller circuitry features at greater densities. These continued hardware developments, economically mass manufactured, have made possible...

Spring 2015

Osborn, Ian

A multi-purpose settling column was designed to determine settling rate and sediment height allowing the in-situ measurement of yield stress and drainage without disturbing the sediment particle network. The settling column was applied to studying flocculation/densification of model oil sands...

Fall 2019

Wu,Di

A novel nopoldiol-benzoxaborolate cross-link formed by a bioorthogonal click reaction between nopoldiol- and benzoxaborole-based components was developed for the preparation of biomaterials such as hydrogels and nanogels. In contrast to the traditional boronic ester-based cross-links, this...

Spring 2015

Biabangard Oskouyi, Amirhossein

In this thesis, a novel three-dimensional continuum percolation model based on Monte Carlo simulation approach was developed and employed to investigate the percolation behavior of the electrically insulating matrix reinforced with conductive nanoplatelet fillers such as graphene. The...

Spring 2014

El-Thaher, Nayef

Conversion of protein-rich biomass waste into value-added industrial products via chemical cross-linking reactions was explored. Two types of cross-linking reagents were investigated: dialdehydes and epoxy resins. Reaction chemistry was the main focus of this investigation and the main reaction...

Fall 2011

Akin, Oguz

Coupling supercritical CO2 extraction with membrane separation leads to energy savings by recycling CO2 at supercritical state while separating extract components. Commercially available polyamide-based membranes are commonly used with coupled systems due to their availability and robust...

Fall 2009

Molavi, Ommoleila

Signal Transducer and Activator of Transcription 3 (STAT3), a common oncogenic mediator, is constitutively activated in many types of human cancers and plays a critical role in tumor growth and cancer immune evasion. The focus of this dissertation is the delivery of STAT3 inhibitor cucurbitacins...

2016-10-02

Bhattacharya, Sujit, Arora, Nitin, Ng, Samson, Chong, Jeng Y., Kresta, Suzanne M., Machado, Marcio B.

Mixing conditions were explored as a possible avenue for improvement of demulsifier performance in solvent diluted bitumen de-watering process. The effects of demulsifier bulk concentration, demulsifier injection concentration and mixing energy on water and solids removal from the oil phase were...

Fall 2022

Mostafa, Khaled

Additive manufacturing (AM) is a process of joining materials to make parts from 3D model data by successive layer by layer material addition. AM has triggered a paradigm shift towards parts and assemblies design methodologies, materials development and utilization, and additional part...

Spring 2021

Hartley, Kendra Jade

Hand injuries, due to impact, are common workplace injuries. Many work gloves afford impact protection through design of add-on components known as bumpers. Glove design criteria are complex (e.g., limitations from human factors, dexterity, use case, hand size variability) and commercial bumpers...