Search

Spring 2015

Renaud, Richard

Solvent based extraction has the potential to supplant the current hot water based extraction process as the industry standard method for recovering bitumen from mined oil sand. It has the potential for higher bitumen recovery that is less sensitive to the grade of oil sand ore being processed....

Spring 2015

Primkulov, Bauyrzhan K

The minable oil sands extraction process can be understood on a scale of a single oil sand grain. When the oil sand ore is mixed with warm water, each sand granule is initially covered with bitumen film which ruptures under the composite effect of shear and interfacial forces, while water...

Fall 2013

Zheng, Limin

The high degree of variability of oil sands ores can be attributed to a mixture of different geological end members, i.e., estuarine sand, estuarine clay, marine sand and marine clay. This study focused on the mineralogy, especially of clay minerals, and toluene insoluble organic matter, referred...

Fall 2011

Hooshiar Fard, Mohammad Ali

Production of oil from the second largest oil deposit in the world, i.e., the Alberta oil sands containing approximately 13% of total proven oil reserves in the world (169.9 billion barrels), has been shown to be significantly influenced by clay minerals. Clay minerals in particular play a key...

Fall 2014

Afshar, Shima

The current water-based method of bitumen extraction requires withdrawal of fresh water from the Athabasca River — a practice which leads to the continual buildup of tailings ponds and other environmental concerns. As Alberta’s bitumen production is expected to more than double by 2020, there is...

Fall 2017

Aghaie, Ermia

The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...

Fall 2014

Chen, Liang

The formation of stable water-in-oil emulsions during bitumen extraction poses problems for water separation from diluted bitumen, which leads to equipment corrosion and catalyst fouling in downstream operations. Demulsifiers are used to break the stable emulsions and assist the separation of...

Spring 2014

Guest, Stuart Dan

Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...

Spring 2020

Zhang, Dingfang

Albertan oil sands ores are becoming more difficult to process efficiently as the clay content of the ore increases and the grade of the ore worsens. A key to improving the extraction of bitumen from low-grade oil sands, thereby increasing the longevity of this critical resource, is reducing the...

Fall 2015

Rocha Aguilera, Gonzalo

As demand for fuel increases, new technologies that can convert heavy oil and bitumen into light fuels are needed. Natural zeolites have been proven to catalyze reactions that decrease molecular weight, density, nitrogen, and metals content as well as vacuum residue content when mixed with raw...