Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Baker, Kathleen E.N.
- 1Chen, Liang
- 1Guest, Stuart Dan
- 1Hooshiar Fard, Mohammad Ali
- 2Shaw, John M. (Chemical and Materials Engineering)
- 2Yeung, Anthony (Chemical and Materials Engineering)
- 1Choi,Phillip (Chemical and Materials Engineering)
- 1Etsell, Thomas (Chemical & Materials Engineering)
- 1Etsell, Thomas H, (Chemical and Materials Engineering)
- 1Gray, Murray (Chemical and Materials Engineering)
-
A Study on the Effect of Temperature and Pressure on the Removal of Cyclohexane from Non-Aqueous Extraction Gangue
DownloadSpring 2015
Solvent based extraction has the potential to supplant the current hot water based extraction process as the industry standard method for recovering bitumen from mined oil sand. It has the potential for higher bitumen recovery that is less sensitive to the grade of oil sand ore being processed....
-
Beyond Viscosity—How Density, Vibration and Interfacial Tension Affect Solvent Aided Bitumen Production
DownloadFall 2016
Bitumen and heavy oil comprise a significant percentage of proven oil reserves globally. The environmental impacts of producing these resources with current technologies is a concern for environmentalists, oil producing companies, resource rich jurisdictions and society at large. Dilution of the...
-
Spring 2015
The minable oil sands extraction process can be understood on a scale of a single oil sand grain. When the oil sand ore is mixed with warm water, each sand granule is initially covered with bitumen film which ruptures under the composite effect of shear and interfacial forces, while water...
-
Fall 2013
The high degree of variability of oil sands ores can be attributed to a mixture of different geological end members, i.e., estuarine sand, estuarine clay, marine sand and marine clay. This study focused on the mineralogy, especially of clay minerals, and toluene insoluble organic matter, referred...
-
Characterization of Clay Minerals in the Athabasca Oil Sands in Water Extraction and Nonaqueous Solvent Extraction Processes
DownloadFall 2011
Production of oil from the second largest oil deposit in the world, i.e., the Alberta oil sands containing approximately 13% of total proven oil reserves in the world (169.9 billion barrels), has been shown to be significantly influenced by clay minerals. Clay minerals in particular play a key...
-
Colloid Science of Sand Remediation: A Study Motivated by the Non-Aqueous Extraction of Bitumen from Oil Sands
DownloadFall 2014
The current water-based method of bitumen extraction requires withdrawal of fresh water from the Athabasca River — a practice which leads to the continual buildup of tailings ponds and other environmental concerns. As Alberta’s bitumen production is expected to more than double by 2020, there is...
-
Fall 2014
The non-aqueous extraction process involves dilution of mined oil sand with an organic solvent (the “diluent”), followed by separation of unwanted materials (clays, silica sand, connate water, etc.) from the diluted bitumen. The main focus of this research is on the removal of fines solids from...
-
Fall 2017
The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...
-
Fall 2014
The formation of stable water-in-oil emulsions during bitumen extraction poses problems for water separation from diluted bitumen, which leads to equipment corrosion and catalyst fouling in downstream operations. Demulsifiers are used to break the stable emulsions and assist the separation of...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...