Search
Skip to Search Results- 1Abtahi, Shaghayegh
- 1Aghaie, Ermia
- 1Ahmed, E.
- 1Ahmed, Ezz Q
- 1Arango Vasquez,Daniela
- 1Ashrafizadeh, Sayed Hossein
- 32Graduate and Postdoctoral Studies (GPS), Faculty of
- 32Graduate and Postdoctoral Studies (GPS), Faculty of/Theses and Dissertations
- 2Mechanical Engineering, Department of
- 1Chemical and Materials Engineering, Department of
- 1Chemical and Materials Engineering, Department of/Research Articles and Materials (Chemical and Materials Engineering)
- 1Mechanical Engineering, Department of/Journal Articles (Mechanical Engineering)
- 5Chen, Weixing (Chemical and Materials Engineering)
- 5Luo, Jingli (Chemical and Materials Engineering)
- 4Li, Dongyang (Chemical and Materials Engineering)
- 2Mitlin, David (Chemical and Materials Engineering)
- 2Thundat, Thomas (Chemical and Materials Engineering)
- 1Al-Hussein, Mohamed (Civil and Environmental Engineering)
-
Fall 2023
Tribocorrosion, a synergistic impact of wear and corrosion, impacts the lifespan of machine parts in most sectors. Consequently, duplex coating has emerged as the most promising solution to address tribocorrosion. In this work, advanced noble duplex coating systems of TiAlN/WC-NiBSi/steel and...
-
Spring 2011
Flotation process is mineral processing technique used for separating valuable minerals from the gangue. The research presented in this thesis deals with assessing features that can help in measuring the performance (observing) bitumen flotation process and modeling damage in flotation units. A...
-
Fall 2013
Hydraulic transport is commonly employed in the mining industry to transport crushed ore to a processing facility. Dense slurry flows inflict heavy wear on pipes, leading to significant process downtime and loss of revenue. Several factors have been identified as key contributors to pipe wear. ...
-
Computational investigation of the effect of microstructure on the scratch resistance of tungsten-carbide nickel composite coatings
Download2021-08-15
Parsazadeh, Mohammad, Fisher, Gary, McDonald, André, Hogan, James D.
Sliding wear was simulated for tungsten carbide-nickel (WC-Ni) composites with different WC particle sizes and volume fractions under various normal forces. Johnson-Cook and Johnson-Holmquist models were employed to simulate the mechanical behaviour of the Ni and WC phases, respectively. Using...
-
Fall 2015
The present research has been done with the intent of evaluating the corrosion resistance and cracking susceptibility of some commercial candidate alloys that can be potentially used in Gen-IV supercritical water reactor (SCWR). The mechanism of the crack initiation in austenitic alloys exposed...
-
Corrosion Assessment and Mechanisms of Materials in Pre-hydrolysis and Hydrothermal Liquefaction Biorefining Systems
DownloadFall 2022
Advanced biomass conversion technologies, including hot dilute acidic pre-hydrolysis and hydrothermal liquefaction, have been developed for the generation of renewable bioenergy products and biochemicals from existing biomass resources and biowastes. However, the deployment of the technologies is...
-
Spring 2013
As the Supercritical Water-cooled Reactor (SCWR) shows a promising future, the corrosion behavior of candidate materials has attracted great interest. In this study, experimental investigation was conducted to evaluate the corrosion behavior of the ferritic-martensitic steels designed for the use...
-
Spring 2017
Severe localized corrosion was found throughout an aeration tank of a modular wastewater treatment plant. Specifically, pitting, crevice corrosion, galvanic corrosion, and intergranular corrosion (IGC) were observed on the 5000 and 6000 series aluminum alloys used in the tank’s construction. One...
-
Spring 2015
This thesis presents a thorough examination of the corrosion and fouling behaviour of crude oil at refining conditions on industrially applicable heat transfer surfaces. The depletion of light sweet crude oil reserves means that the processing of ever heavier and more sour crude oils is...
-
Corrosivity and Thermal Stability of Biocrude Oil for Co-Processing in FCC Feedlines: An Investigation and Risk Assessment
DownloadSpring 2023
Fast pyrolysis bio-oil is a promising renewable energy source derived from biomass. However, its high corrosivity and poor thermal stability have limited its widespread use as a drop-in fuel. One promising method for transforming low-quality biocrudes into drop-in fuels is co-processing with...