Search
Skip to Search Results- 1Gawor, Steffen
- 1Hogan, James D.
- 1Kennedy, Jacob R
- 1Lepore, Justin N
- 1Mohammadi, Farzad
- 1Nazeri, Hamed
-
An investigation of the strain field and inter-fragmentary movement of a broken hemi-pelvis
DownloadFall 2015
Pelvic fracture is considered a common and sometimes fatal injury. There are still developments in novel pelvic fixations. In order to investigate the performance of these fixations, a specialized testing set-up is required. Typically, the strains of a few selected points and the changes in the...
-
Fall 2019
Residual stresses can have a significant impact on the stability of structural members. In the case of I-section beam elements, such stresses can impact lateral--torsional buckling (LTB) capacity, particularly in the inelastic range. I-sections are typically fabricated by either rolling as a...
-
2019-07-15
Nicewicz, P., Sano, T., Hogan, James D.
The quasi-static compaction response of granular stainless steel 316 was studied under triaxial loading conditions using a confined crucible experiment apparatus, specifically looking at effects of the particle size (127 ± 34 μm, 309 ± 88 μm, 487 ± 98 μm)on mechanical behavior. The material...
-
Spring 2015
This thesis presents a thorough examination of the corrosion and fouling behaviour of crude oil at refining conditions on industrially applicable heat transfer surfaces. The depletion of light sweet crude oil reserves means that the processing of ever heavier and more sour crude oils is...
-
Spring 2011
Stainless steel is one of the most commonly used materials in most industries. Excellent corrosion resistance of stainless steel is due to the formation of an oxide film on the surface (passive film), which protects the material from continuous corrosion attacks. When subjected to an attack...
-
Fall 2019
An evaluation of the resistance of two different X70 pipeline steels to hydrogen-induced cracking in severe (pH 2.7 and 1 atm H2S) and intermediate (pH 5.5 and 1 atm H2S) sour service conditions was undertaken. The two steels used in this work, X70-X and X70-B, were selected based on their...
-
Fall 2014
Seismic velocity dispersion in crystalline rock is investigated through experimental measurements on two natural quartzite specimens. The quartzites are thermally damaged to induce low aspect ratio cracks and the shear and Young’s moduli are measured across a range of effective pressures, from...
-
Functionalization and Characterization of Metal Oxide Coatings of Stainless Steel and Silica Nanoparticles
DownloadSpring 2013
The development of tolerogens, fabricated devices eliciting tolerance toward incompatible donor ABO antigens in implant patients, is the ultimate goal of this project. This would permit ABO incompatible organ transplants, increase the donor pool for patients, increase efficiency in the use of...
-
Reliability Centered Maintenance (RCM) and Ultrasonic Leakage Detection (ULD) as a maintenance and condition monitoring technique for freight rail airbrakes in cold weather conditions
DownloadSpring 2015
Freight rail airbrakes need improvement in reliability to reduce failures, which can lead to harm to the environment, loss of human life, and a negative impact on the economy. This research focuses on identifying the failures of airbrakes using a Reliability Centered Maintenance (RCM) framework,...
-
The Role of Sulfur Species in Establishing the Corrosion Reactions in Refinery Metallurgies
DownloadSpring 2016
This thesis is focused on the studying the role that model sulfur-containing molecules have in corrosion reactions on relevant metallurgies. This was done by using a design of experiments where a number of sulfur-based compounds were reacted with various metallurgies. The 8 model sulfur compounds...