Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Amani, Mohammad Javad
- 1Anas Khalil Sidahmed
- 1Archibald, Heather Anne
- 1Baker, Kathleen E.N.
- 48Department of Chemical and Materials Engineering
- 17Department of Civil and Environmental Engineering
- 13Department of Renewable Resources
- 7Department of Earth and Atmospheric Sciences
- 4Department of Mechanical Engineering
- 3Department of Physics
- 5Xu, Zhenghe (Chemical and Materials Engineering)
- 4De Klerk, Arno (Chemical and Materials Engineering)
- 2Froese, Duane (Earth and Atmospheric Sciences)
- 2Guigard, Selma (Department of Civil and Environmental Engineering)
- 2Kuznicki, Steve (Chemical and Materials Engineering)
- 2Liu, Qi (Chemical and Materials Engineering)
-
Colloid Science of Sand Remediation: A Study Motivated by the Non-Aqueous Extraction of Bitumen from Oil Sands
DownloadFall 2014
The current water-based method of bitumen extraction requires withdrawal of fresh water from the Athabasca River — a practice which leads to the continual buildup of tailings ponds and other environmental concerns. As Alberta’s bitumen production is expected to more than double by 2020, there is...
-
Fall 2013
Bitumen, as one of the most important unconventional sources of energy, has long been an attractive source for production of liquid fuels. It is important to improve the yield and quality of the useful products resulting from bitumen upgrading processes so that the best outcome can be achieved...
-
Fall 2017
The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...
-
Fall 2014
The formation of stable water-in-oil emulsions during bitumen extraction poses problems for water separation from diluted bitumen, which leads to equipment corrosion and catalyst fouling in downstream operations. Demulsifiers are used to break the stable emulsions and assist the separation of...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...
-
Spring 2019
This thesis aims to demonstrate the feasibility of using System Dynamics (SD) techniques to develop a transparent, open-source and reproducible model capable of simulating long-term soil water dynamics in a tailings-cap system subject to upward flux from a consolidating tailings substrate. The...
-
Development of an Experimental Apparatus for Studying the Effects of Acoustic Excitation on Viscosity
DownloadFall 2012
An experimental apparatus was developed capable of measuring changes in fluid viscosity occurring due to acoustic stimulation. Controls allowed measurements at simulated oil sand reservoir pressures and temperatures with near real-time data visualization. Calibration was performed...
-
Development Of Shrub And Lichen-Dominated Biocrust Propagation And Establishment Techniques For Reclamation In Northern Environments
DownloadSpring 2022
Resource exploration and extraction in the arctic causes long lasting disturbances as natural recovery is a long and slow process in the north. With three Canadian diamond mines expected to close in the next fifteen years, many hectares of land will require revegetating. Research conducted in the...
-
Development of Solvent Selection Criteria Based on Diffusion Rate, Mixing Quality, and Solvent Retrieval for Optimal Heavy-Oil and Bitumen Recovery at Different Temperatures
DownloadFall 2015
Heavy-oil and bitumen recovery requires high recovery factors to offset the extreme high cost of the process. Attention has been given to solvent injection for this purpose and it has been observed that high recoveries are achievable when combined with steam injection. Heavier (“liquid”) solvents...