Search
Skip to Search Results- 2Shi, Hongbo
- 1Amin, Mahmud R
- 1Bayati, Mohsen
- 1Cornejo Garcia, Ivan
- 1Gao, Mingze
- 1Habibzadeh Gharehbaba, Alireza
- 2Lange, Carlos (Mechanical Engineering)
- 2Nikrityuk, Petr (Chemical and Materials Engineering)
- 2Nikrityuk, Petr (Department of Chemical and Materials Engineering)
- 2Zhu, David (Civil and Environmental Engineering)
- 1 Hayes, Robert E. (Chemical and Materials Engineering )
- 1Chan, Dave (Civil and Environmental Engineering)
-
Developing New Methodologies to the Simulation of Emulsion Mixtures with Transport of Particles in OpenFOAM
DownloadFall 2022
Sand separators are commonly equipped inline in the oil and gas production to separate produced sand from the extracted fluids, usually a mixture of oil, water and gas. To ensure the equipment can satisfy the work conditions, Computational Fluid Dynamics (CFD) is widely used. However, the...
-
Spring 2023
Circular turbulent jets are essential in many engineering applications and are thoroughly studied. Most of these studies involve stationary jets. Contemporary studies lack the understanding of translating jets partly because the experimental setup is complicated, and computational models cannot...
-
Experimental and numerical simulation of degradation of pollutants in water by microbubble-enhanced cold plasma activation -Degradation - Effect of pollutants’ initial concentration
DownloadSpring 2024
The necessity to secure reliable water resources has always been a challenge for human societies. Numerous factors contribute to heightened concerns, often resulting in serious crises for governments striving to ensure the provision of clean potable water for diverse purposes. At the same time,...
-
Experimental Investigation of Near-well Fluid Mechanics on the Scaling Mechanism in Narrow Rectangular Slots
DownloadSpring 2020
This experimental study investigates the effect of near-well fluid mechanics on the scaling failure mechanism specific to SAGD production well. The scaling failure mechanism can be triggered by the pressure drop phenomenon and causes the plugging of the slots in the oilfields. The scale formation...
-
Fall 2013
Habibzadeh Gharehbaba, Alireza
The current work presents the results of an experimental study on the effects of submergence on the performance of a submerged hydraulic jump with baffle blocks downstream of a sluice gate. A wide range of Froude numbers, submergence factors, and block sizes, locations and arrangements were...
-
Exploring the Relationship between Morphological Parameters and Hemodynamic Characteristics in Ascending Thoracic Aortic Aneurysms Using Fluid-Structure Interaction with Patient-specific Models
DownloadFall 2023
Ascending thoracic aortic aneurysm (ATAA) is an abnormal bulge in the ascending part of the aorta. It is associated with the risk of dissection and rupture and has been known as the "silent killer". When dissection or rupture, the outcome is usually severe and associated with high mortality. To...
-
Spring 2020
The main objective of the present study is to experimentally and numerical studies of hydrodynamic cavitation phenomenon in the Venturi tubes, in order to validate and further develop numerical multiphase flow models with the obtained data. To achieve this, a visible experimental set-up was...
-
Fall 2017
Sinkholes are frequently reported around the world, and soil erosion around defective sewer pipe is found to be one of the possible cause of sinkholes. As water infiltrates through the defect in a pipe, soil can be washed into the pipe leading to a cavity or even sinkhole formation. Besides,...
-
Spring 2020
This thesis reports the study of flow inside a honeycomb type substrate. Honeycomb monoliths are extensively used in the automotive industry, as substrates in the exhaust gas after-treatment system. The flow approaching a honeycomb monolith is usually highly turbulent; However, once entering the...
-
Fall 2013
The overall objective is to research methods for the efficient simulation of structured reactors using models that can capture as much of the real micro scale phenomena as possible within the constraint of running in a realistic amount of computer time. The problem of modelling a complete...