Search
Skip to Search Results- 1Abraham, Tinu M
- 1Adegoroye, Adebukola
- 1Ali, Babkir SM
- 1Archibald, Heather Anne
- 1Badiozamani Tari Nazari, Mohammad Mahdi
- 1Baker, Kathleen E.N.
-
Fall 2010
Oil sand deposits are found at three depths; shallow, intermediate, and deep. Shallow deposits are processed by surface mining while deep deposits are processed using thermal extraction methods. There are currently no production methods to extract oil sand at intermediate depths. The...
-
Fall 2011
A cationic thermal sensitive polymer, polyN-isopropylacrylamide-co-N-[3-(Dimethylamino)propyl]methacrylamide (CP) of different molar ratios, known as CP05 and CP10 was synthesized in-house. By doping aluminum hydroxide (Al(OH)3) colloids into CP during the polymerization process, a novel hybrid...
-
Spring 2013
As one of the most critical steps to recover valuable particles from a slurry using flotation, knowledge of the drainage of the thin liquid film between an air bubble and a solid surface is required. The main focus of this thesis is to develop and use an integrated thin film drainage appratus...
-
A Study on the Effect of Temperature and Pressure on the Removal of Cyclohexane from Non-Aqueous Extraction Gangue
DownloadSpring 2015
Solvent based extraction has the potential to supplant the current hot water based extraction process as the industry standard method for recovering bitumen from mined oil sand. It has the potential for higher bitumen recovery that is less sensitive to the grade of oil sand ore being processed....
-
Spring 2010
The technique of Inverse Gas Chromatography (IGC) was employed for the study of the interactions between various organic solvents with various types of the major inorganic materials (clay minerals and sand) found in Alberta’s oil sands. Heat of adsorption (-∆H) was measured for each solvent with...
-
Spring 2014
Environmental concerns about water-based extraction necessitate the development of an alternative non-aqueous extraction method. One of the challenges that any non-aqueous extraction process is encountered is the elimination of suspended fine solids from solvent-diluted bitumen. This study...
-
Spring 2021
At different stages during the extraction of bitumen from the Athabasca oil sands, the removal of unwanted fine solids whether suspended in aqueous or non-aqueous liquids continues to present serious challenges to the oil sands industry. These fine solids are unique in that their colloidal...
-
An Alternate Indicator System for Nutrient Supply as Part of Ecosystem Function, a Component of Reclamation Success in the Athabasca Oil Sands Region
DownloadFall 2017
Northeastern Alberta faces the challenges of reclaiming a vast area that has been disturbed my oil sands mining, cumulatively 896 km2 and increasing as of December 2013. The limited resources available for reclamation and expensive costs of undertaking the process necessitates that reclamation be...
-
Spring 2013
The surface mining of oil sand ore requires the use of huge shovels and 400-tonne capacity trucks to transfer the mined ore to the slurry preparation plant, where water and additives are added to the crushed ore. The oil sand slurry is then transported to the extraction section and simultaneously...
-
An Integrated Approach for Sustainability Assessment: The Wa-Pa-Su Project Sustainability Rating System
DownloadFall 2014
As global demand for energy continues to rise, unconventional petroleum extraction and production of petroleum substitutes are both becoming more necessary. Development and operation of unconventional oil projects can have considerable social, economic, and environmental impacts. For example, one...