Search
Skip to Search Results- 1ALBAHLANI, ALMUATASIM MOHAMMED
- 1Alizadehgiashi, Moien
- 1Athar, Khan S
- 1Baron, Corey A
- 1Boddez, Jason Bradley
- 1Braun, Bennett L.
- 16Department of Mechanical Engineering
- 7Department of Chemical and Materials Engineering
- 4Department of Civil and Environmental Engineering
- 2Department of Earth and Atmospheric Sciences
- 1Civil and Environmental Engineering
- 1Department of Biomedical Engineering
- 2Alessi, Daniel (Earth and Atmospheric Sciences)
- 2Babadagli, Tayfun (Department of Civil and Environmental Engineering)
- 2Beaulieu, Christian (Biomedical Engineering)
- 2Koch, Bob (Mechanical Engineering)
- 2Lange, Carlos (Mechanical Engineering)
- 1Arvind Rajendran (Chemical and Materials Engineering)
-
Spring 2024
Hydrogen as a fuel has the potential to reduce tailpipe carbon dioxide emissions of vehicles to near-zero, while also allowing for the generation of a hydrogen-based economy and lowering humanity's dependence upon oil. Hydrogen-diesel dual fuel combustion, where hydrogen and diesel are combusted...
-
Improvement of thermal heavy-oil recovery in sandstone and carbonate reservoirs using hydrocarbon solvents
DownloadFall 2011
ALBAHLANI, ALMUATASIM MOHAMMED
This thesis introduces a new approach for heavy-oil recovery from fractured reservoirs: Steam-Over-Solvent Injection in Fractured Reservoirs (SOS-FR). The SOS-FR technique is a new technology proposed as an alternative method to the sole injection of steam or solvent and consists of three...
-
Fall 2018
Dual-fuel Reactivity Controlled Compression Ignition (RCCI) combustion is investigated as an efficient combustion mode on a modified 4-cylinder production Gasoline Direct Injection (GDI) engine. RCCI uses Low-Temperature Combustion (LTC) to provide high efficiency combustion while avoiding NOx...
-
Spring 2016
A dual-fuel system is used to control HCCI combustion timing and load in a CFR engine. The systems steady-state response to iso-octane and n-heptane injected energy is investigated then a dynamic ARMAX model is found using system identification. This model is used to design a norm-optimal...
-
Lab to Field Scale Modeling of Low Temperature Air Injection with Hydrocarbon Solvents for Heavy-Oil Recovery in Naturally Fractured Reservoirs
DownloadFall 2015
Alternatives for enhanced oil recovery processes in heavy oil containing deep naturally fractured reservoirs (NFR) are limited due to excessive heat losses when steam is injected. Air injection at high temperature oxidation conditions (in-situ combustion) has been considered as an alternative to...
-
Lithium Recovery from Hydraulic Fracturing Flowback and Produced Water using a Manganese-Based Sorbent
DownloadFall 2020
Increased demand for lithium products for use in lithium ion batteries has led to a search for new lithium resources in recent years in order to meet projected future consumption. One such potential lithium resource is low lithium bearing brines that are discharged from hydraulically fractured...
-
Spring 2010
The demand for accurate bitumen-pentane mass transfer data was the main motivation behind this research. Difficulties such as complex phase behavior, high viscosity and opacity of the hydrocarbon invariably lead to failure of conventional techniques to measure mass transfer coefficients...
-
Fall 2016
Different model based control strategies are developed for combustion timing and load control in a single cylinder Homogeneous Charge Compression Ignition (HCCI) engine. In HCCI engines, a lean homogeneous air-fuel mixture auto-ignites due to compression and the resulting combustion occurs at...
-
Fall 2009
Homogeneous Charge Compression Ignition (HCCI) is a promising method for combustion engines to provide a substantial reduction in fuel consumption and formation of both nitrogen oxides and soot pollutants in automotive and stationary engines. Control of HCCI combustion timing is essential for the...
-
Spring 2024
Lithium is crucial for battery production and is utilized in electric vehicles and portable electronics. Among alternative sources of lithium is flowback and produced water (FPW) brines, which can be recovered utilizing ion-exchange with sorbents such as lithium manganese oxide spinels. Among...