Theses and Dissertations
This collection contains theses and dissertations of graduate students of the University of Alberta. The collection contains a very large number of theses electronically available that were granted from 1947 to 2009, 90% of theses granted from 2009-2014, and 100% of theses granted from April 2014 to the present (as long as the theses are not under temporary embargo by agreement with the Faculty of Graduate and Postdoctoral Studies). IMPORTANT NOTE: To conduct a comprehensive search of all UofA theses granted and in University of Alberta Libraries collections, search the library catalogue at www.library.ualberta.ca - you may search by Author, Title, Keyword, or search by Department.
To retrieve all theses and dissertations associated with a specific department from the library catalogue, choose 'Advanced' and keyword search "university of alberta dept of english" OR "university of alberta department of english" (for example). Past graduates who wish to have their thesis or dissertation added to this collection can contact us at erahelp@ualberta.ca.
Items in this Collection
- 1Abraham, Tinu M
- 1Adegoroye, Adebukola
- 1Chan, Margo Chi Wing
- 1Chong, Jeng Yi
- 1Conrad, Brett M
- 1Darius, Juan
- 8Xu, Zhenghe (Chemical and Materials Engineering)
- 3Liu, Qingxia (Chemical and Materials Engineering)
- 3Masliyah, Jacob (Chemical and Materials Engineering)
- 3Sanders, Sean (Chemical and Materials Engineering)
- 2Henein, Hani (Chemical and Materials Engineering)
- 2Kresta, Suzanne (Chemical and Materials Engineering)
-
A NEW APPROACH TO MODEL FRICTION LOSSES IN THE WATER-ASSISTED PIPELINE TRANSPORTATION OF HEAVY OIL AND BITUMEN
DownloadSpring 2016
Water lubricated pipe flow technology is an economic alternative for the long distance transportation of viscous oils like heavy oil and bitumen. The lubricated flow regime involves an oil-rich core surrounded by a turbulent water annulus. Energy consumption associated with this type of pipeline...
-
Fall 2011
A cationic thermal sensitive polymer, polyN-isopropylacrylamide-co-N-[3-(Dimethylamino)propyl]methacrylamide (CP) of different molar ratios, known as CP05 and CP10 was synthesized in-house. By doping aluminum hydroxide (Al(OH)3) colloids into CP during the polymerization process, a novel hybrid...
-
Spring 2013
As one of the most critical steps to recover valuable particles from a slurry using flotation, knowledge of the drainage of the thin liquid film between an air bubble and a solid surface is required. The main focus of this thesis is to develop and use an integrated thin film drainage appratus...
-
Spring 2010
The technique of Inverse Gas Chromatography (IGC) was employed for the study of the interactions between various organic solvents with various types of the major inorganic materials (clay minerals and sand) found in Alberta’s oil sands. Heat of adsorption (-∆H) was measured for each solvent with...
-
Spring 2014
Environmental concerns about water-based extraction necessitate the development of an alternative non-aqueous extraction method. One of the challenges that any non-aqueous extraction process is encountered is the elimination of suspended fine solids from solvent-diluted bitumen. This study...
-
Spring 2021
At different stages during the extraction of bitumen from the Athabasca oil sands, the removal of unwanted fine solids whether suspended in aqueous or non-aqueous liquids continues to present serious challenges to the oil sands industry. These fine solids are unique in that their colloidal...
-
Spring 2013
The surface mining of oil sand ore requires the use of huge shovels and 400-tonne capacity trucks to transfer the mined ore to the slurry preparation plant, where water and additives are added to the crushed ore. The oil sand slurry is then transported to the extraction section and simultaneously...
-
Spring 2015
A multi-purpose settling column was designed to determine settling rate and sediment height allowing the in-situ measurement of yield stress and drainage without disturbing the sediment particle network. The settling column was applied to studying flocculation/densification of model oil sands...
-
Spring 2016
Canada has the world’s largest oilsands reserves. Part of the reserves is being considered as marginal and is not profitable to recover using current technology. Autoxidation (oxidation with air) is a potential upgrading strategy to produce more valuable products from the oilsands derived bitumen...
-
Spring 2016
During the extraction of crude oil or bitumen, stable water-in-oil emulsions are inevitably formed. The emulsified water contains chloride ions and other organic acidic compounds that cause severe corrosion problems to the downstream plant equipment, creating operational and safety issues and...