Search
Skip to Search Results- 1352Department of Chemical and Materials Engineering
- 3Department of Biomedical Engineering
- 2Department of Biological Sciences
- 2Department of Laboratory Medicine and Pathology
- 1Department of Civil and Environmental Engineering
- 1Department of Human Ecology
- 2Bendrich, Michelle
- 2El-Thaher, Nayef
- 2Fadic Eulefi, Anton
- 2Hoseinzadeh Hejazi, Sayed Alireza
- 2Hosseininejad, Seyed Shaham Aldin
- 2Kammammettu, Sanjula
- 44Xu, Zhenghe (Chemical and Materials Engineering)
- 40Huang, Biao (Chemical and Materials Engineering)
- 34Liu, Qingxia (Chemical and Materials Engineering)
- 29Zeng, Hongbo (Chemical and Materials Engineering)
- 27Henein, Hani (Chemical and Materials Engineering)
- 21Gupta, Rajender (Chemical and Materials Engineering)
-
A Study of Rapidly Solidified Al1.5wt%/3wt%Mg0.2wt%Sc Powders and Strips using Impulse Atomization
DownloadFall 2016
In this work, rapid solidification microstructures and mechanical properties of Al1.5Mg0.2Sc and Al3Mg0.2Sc are investigated. Samples in the form of powders and strips / deposits of different thermal histories are obtained by means of impulse atomization technique. Cooling rates of the powders,...
-
A study of the colloidal stability of mixed abrasive slurries of silica and ceria nanoparticles for chemical mechanical polishing
DownloadFall 2011
Slurry stability is an important factor in Chemical Mechanical Polishing (CMP) efficiency. However, few studies have been done in this respect. In settling tests at pH 4, adding various amounts of ceria to colloidal silica slurries was shown to change the stability of the resulted mixed abrasive...
-
A Study on Phase Change Materials at Low Thermal Mass with Micro-Electro-Mechanical Resonators
DownloadSpring 2020
Micro-electromechanical systems or MEMS is a modern technology used to create tiny, integrated devices or systems that combine mechanical and electrical components. These miniaturized devices can sense, control and actuate on the micro and nano scales, and generate observable effects on the macro...
-
A study on pressure vacuum swing adsorption based process design for carbon dioxide capture
DownloadFall 2017
In order to reduce greenhouse gas emissions, realizing an energy efficient carbon dioxide capture process is important. Adsorption based carbon capture is a potential low energy separation technology. Although there have been considerable advances in this field, a full technological maturity of...
-
A Study on the Effect of Temperature and Pressure on the Removal of Cyclohexane from Non-Aqueous Extraction Gangue
DownloadSpring 2015
Solvent based extraction has the potential to supplant the current hot water based extraction process as the industry standard method for recovering bitumen from mined oil sand. It has the potential for higher bitumen recovery that is less sensitive to the grade of oil sand ore being processed....
-
A Surface Science Approach Towards Understanding and Mitigating Fouling and Corrosion in Crude Oil Refinery Units
DownloadFall 2021
This research presents a detailed investigation of corrosion and organic fouling on several important metallurgies in a broad range of crude oils. Throughout a refinery, fouling of metallic heat-transfer surfaces is a ubiquitous, costly, and complex phenomena, made increasingly challenging by...
-
Fall 2014
In today’s vehicle applications, Selective Catalytic Reduction (SCR) ammonia dosing is completed using complex control algorithms that need to be parameterized for the individual catalytic converter technology. The parameterization of these control strategies is not always completed during the...
-
A Systematic Methodology to Develop Scaling Laws for Thermal Features of Temperature Field Induced by a Moving Heat Source
DownloadSpring 2021
A systematic methodology is developed to formulate scaling laws in closed-form for thermal features of moving line heat source and Gaussian heat source problems, with wide generality, high accuracy and practical simplicity, from fundamental principles. The expressions are written in form of a...
-
A-Site Deficient Lanthanum Strontium Chromite Oxide with In-Situ Growth of Ni-Co Nano-Alloys: A Potential Electrode Catalyst for Solid Oxide Fuel Cell
DownloadSpring 2017
Solid oxide fuel cell (SOFC) is an advanced power generation device that has desirable fuel flexibility and higher efficiency compared to conventional electricity generators. Since SOFC requires different fuel gases for reactions, a catalytically active fuel electrode with excellent stability as...