Search

Spring 2015

Renaud, Richard

Solvent based extraction has the potential to supplant the current hot water based extraction process as the industry standard method for recovering bitumen from mined oil sand. It has the potential for higher bitumen recovery that is less sensitive to the grade of oil sand ore being processed....

Fall 2013

Tanchuk, Brenden M S

Two separations are necessary to enable the post-combustion capture of CO2. The fraction of CO2 in a flue gas stream must first be separated from the diluents present and then the concentrated stream of CO2 must be thoroughly dried in order for it to be compressed for sequestration. This work...

Fall 2019

Poon, Ho Yin

Oil sands fluid fine tailings (FFT) are comprised of sand, silt, clay, residual organics, salt, trace metals and process-affected water (OSPW). In order to accommodate and remediate large amounts of FFT, a full-scale demonstration pit lake, where FFT was capped with a mixture of OSPW and fresh...

Spring 2019

Weber, Tien L

Cattle production contributes the largest portion of livestock agricultural greenhouse gas (GHG) emissions in Canada mostly in the form of methane (CH4). Efforts to reduce CH4 emissions have led to modification of diet composition for livestock, resulting in a corresponding change in manure...

Fall 2014

Khan, Muhammad F

The extraction of bitumen from oil sands in Alberta, Canada, leads to the creation of tailings that are contained in lake-sized ponds under zero discharge policy. Stratification of tailings over time leads to the formation of mature fine tailings (MFT), an oil based emulsion containing residual...

Spring 2016

Entezari Najafabadi, Iman

The bitumen production from oil sands surface-mining operations produces large volumes of mineral wastes called tailings. Characterization of the oil sands tailings is of importance to monitor their state for trafficability and reclamation issues, to assess the tailings operation performance, and...

Fall 2020

Miles, Sarah, M

Current development of Alberta’s oil sands region requires large volumes of water, leading to an abundance of oil sands process affected water (OSPW). OSPW contains naphthenic acid fraction compounds (NAFCs) which have been found to contribute extensively to OSPW toxicity. Degradation of this...

Spring 2022

Erland, Broghan

To combat global warming, Canada has committed to reducing greenhouse gases (GHGs) 40-45% below 2005 emission levels by 2025. Monitoring emissions and deriving accurate inventories are essential to reaching these goals. GHGs can be measured at a small scale, often using ground measurements which...

Fall 2013

Zheng, Limin

The high degree of variability of oil sands ores can be attributed to a mixture of different geological end members, i.e., estuarine sand, estuarine clay, marine sand and marine clay. This study focused on the mineralogy, especially of clay minerals, and toluene insoluble organic matter, referred...

Fall 2011

Hooshiar Fard, Mohammad Ali

Production of oil from the second largest oil deposit in the world, i.e., the Alberta oil sands containing approximately 13% of total proven oil reserves in the world (169.9 billion barrels), has been shown to be significantly influenced by clay minerals. Clay minerals in particular play a key...