Search
Skip to Search Results- 1Afshar, Shima
- 1Amani, Mohammad Javad
- 1Bhargava, Aakanksha
- 1Bu, Weida
- 1Castillo Lugo, Javier
- 1Chen, Liang
- 6Xu, Zhenghe (Chemical and Materials Engineering)
- 3De Klerk, Arno (Chemical and Materials Engineering)
- 3Liu, Qi (Chemical and Materials Engineering)
- 3Liu, Qingxia (Chemical and Materials Engineering)
- 2Xu, Zhenghe (Chemical Engineering)
- 2Yeung, Anthony (Chemical and Materials Engineering)
-
Fall 2009
The extraction of bitumen (heavy oil) from the oil sands is predominantly achieved through a water-based technology. This involves a slurrying process, typically called conditioning, which is categorized into three equally important steps: bitumen-sand liberation, bitumen coalescence, and...
-
Spring 2014
In bitumen recovery from oil sands, a percentage of the bitumen is lost to tailings. The effect of fugitive bitumen on fines settling and consolidation in tailings ponds remains controversial. In the current study, the settling performance of mature fine tailings (MFT) in response to flocculant...
-
Fall 2012
Stabilization of water droplets in froth treatment process results in poor de-watering efficiency and potentially affects final bitumen quality. The purpose of this research is to study the effect of solid contamination by diluted bitumen on water droplet stabilization in water in oil emulsions....
-
Electrocoalescence of Water Droplets in Oil Emulsions: Effect of Electric Fields, Surfactants, and Chemical Demulsifiers
DownloadSpring 2019
Stabilization of water-in-oil droplets during bitumen extraction and refining process poses a major challenge in the oil sands industry. These crude oil emulsions are stabilized by rigid films at water droplet-oil interfaces. The salty water remaining in oil causes equipment corrosion, catalyst...
-
Spring 2017
The formation of stable water-in-oil emulsions during oil sands extraction process causes a number of operational issues, such as equipment corrosion, storage and transportation problems. One common method for emulsion breakup in industry is to use chemical demulsifiers. The chemical demulsifiers...
-
High-Float Emulsion Residue: A New Rheological Model Based on the Existence of a Yield Stress
DownloadFall 2016
“High-float” (HF) emulsions are dispersions of micron-sized bitumen droplets in water, with a special type of anionic surfactant functioning as stabilizer. By allowing the water to evaporate from an HF emulsion, what remains is called a “high-float emulsion residue.” Although indistinguishable in...
-
Fall 2015
The rheological properties of heavy oil and bitumen depend on factors such as temperature, pressure, diluent type and diluent composition, as well as sample shear and thermal histories and shear conditions during measurements. Each of these factors can affect the value of apparent viscosity...
-
Fall 2013
In industrial visbreaking processes, the conversion typically takes place at ~450 °C and the extent of conversion is limited by the coking propensity of the feed. Some of the older literature on bitumen upgrading reported that it was possible to substantially upgrade the straight run product at...
-
Spring 2010
The demand for accurate bitumen-pentane mass transfer data was the main motivation behind this research. Difficulties such as complex phase behavior, high viscosity and opacity of the hydrocarbon invariably lead to failure of conventional techniques to measure mass transfer coefficients...