Search
Skip to Search Results- 1Bannister, Rebekah
- 1Beauchesne, Nicholas L.
- 1Borle, Steven D
- 1Chamakura, Jaji
- 1Dueck, Meghan, E
- 1Grondin, Gilbert Y.
- 13Graduate and Postdoctoral Studies (GPS), Faculty of
- 13Graduate and Postdoctoral Studies (GPS), Faculty of/Theses and Dissertations
- 1Civil and Environmental Engineering, Department of
- 1Civil and Environmental Engineering, Department of/Structural Engineering Reports
- 1WISEST Summer Research Program
- 1WISEST Summer Research Program/WISEST Research Posters
- 4Mendez, Patricio (Chemical and Materials Engineering)
- 2Driver, Robert (Civil and Environmental Engineering)
- 1Dr Bonita Watt-Malcolm, Department of Secondary Education
- 1Dr. Douglas Ivey, Department of Chemical and Materials Engineering
- 1Dr. Hani Henein, Department of Chemical and Materials Engineering
- 1Grondin, Gilbert (Civil and Environmental Engineering)
-
Spring 2021
Abstract This tome is both a “solar” dissertation and a “lunar” grimoire that performs its own argument. Adepts of Modernism argues that the infamous “little magazines” of modernism conjured their own enlightened, reading “counter-publics” by exploiting the same strategies and tactics of...
-
Fall 2019
Residual stresses can have a significant impact on the stability of structural members. In the case of I-section beam elements, such stresses can impact lateral--torsional buckling (LTB) capacity, particularly in the inelastic range. I-sections are typically fabricated by either rolling as a...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...
-
Spring 2017
During the past several decades, the relationship between microstructure and mechanical properties of high strength microalloyed steels has been extensively studied in an effort to improve the fracture toughness and strength of these types of steels, without appreciably increasing steel...
-
Spring 2017
Heat distribution measurements in Gas Metal Arc Welding (GMAW) were concurrently measured at the cathode and anode giving increased insight and prediction capabilities. A calorimeter and water cooled cathode were used to determine energy partitions in GMAW for various electrodes, currents,...
-
Factors affecting apprenticeship enrollment and completion in post-secondary hairstyling programs in Alberta
DownloadFall 2014
Research in the field of hairstyling in Alberta has been tremendously neglected, especially concerning the full term programs offered at private vocational colleges. Current research suggests that there has been a significant decrease of apprentices completing and receiving their Journeyperson...
-
Finite Element Model of the Thermal Profile During Submerged Arc Welding with One and Two Electrodes
DownloadFall 2016
The submerged-arc welding (SAW) process is used extensively in the manufacturing of pipes. The heat flow introduced by the welding operation has a significant impact on the properties of both the weld metal and the heat affected zone (HAZ). The work presented in this thesis aims to develop a...
-
Spring 2021
The weld bead width and the penetration depth are major parameters that determine the mechanical strength of the weld joint. The analytic models, such as the Gaussian heat source model, may provide quite accurate estimations for the weld width and penetration; however, the model does not account...