Search
Skip to Search Results- 5Schofield, Jonathon
- 4Brenneis, Dylan
- 4Carey, Jason P.
- 2Adeeb, Samer
- 2Dawson, Michael R.
- 2El-Rich, Marwan
- 4Mechanical Engineering, Department of
- 4Mechanical Engineering, Department of/Journal Articles (Mechanical Engineering)
- 2Graduate and Postdoctoral Studies (GPS), Faculty of
- 2Graduate and Postdoctoral Studies (GPS), Faculty of /Theses and Dissertations
- 2Images of Research Competition
- 1Images of Research Competition/Images of Research Competition 2017
-
Spring 2019
Upper limb amputation is a debilitating condition that affects over 41,000 people in the United States alone. Largely because of limitations in wrist prostheses, many people affected by upper limb amputation are compelled to use compensatory movements to perform tasks of daily living, which often...
-
Spring 2019
Upper limb amputation is a debilitating condition that affects over 41,000 people in the United States alone. Largely because of limitations in wrist prostheses, many people affected by upper limb amputation are compelled to use compensatory movements to perform tasks of daily living, which often...
-
2013
Adeeb, Samer, El-Rich, Marwan, Lewicke, Justin, Carey, Jason P., Schofield, Jonathon, Parent, Eric
Sit-to-stand transfer (STS) is a common yet critical prerequisite for many daily tasks. Literature conducted on healthy STS often assume the body to behave symmetrically across the left and right side; yet only a few studies have been conducted to investigate this supposition. These studies have...
-
Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures composite structures
Download2016
Carey, Jason P., Melenka, Garrett W., Schofield, Jonathon, Dawson, Michael R., Cheung, Benjamin O.
Three dimensional (3D) printing is a technique conventionally used to manufacture prototypes. Commercial desktop 3D printers have become available which produce functional 3D printed parts. The MarkOne by Mark Forged manufactures printed structures reinforced with continuous Carbon, Fiberglass or...
-
Evaluation of Dimensional Accuracy and Material Properties of the MakerBot 3D Desktop Printer
Download2015
Schofield, Jonathon, Carey, Jason P., Dawson, Michael R., Melenka, Garrett W.
Purpose – This paper aims to evaluate the material properties and dimensional accuracy of a MakerBot Replicator 2 desktop 3D printer. Design/methodology/approach – A design of experiments (DOE) test protocol was applied to determine the effect of the following variables on the material properties...
-
Leg Dominance may not be a Predictor of Asymmetry in Peak Joint Moments and Ground Reaction Forces during Sit to Stand Movements
Download2014
Adeeb, Samer, El-Rich, Marwan, Lewicke, Justin, Carey, Jason P., Schofield, Jonathon, Parent, Eric
Sit-to-stand transfer is a common prerequisite for many daily tasks. Literature often assumes symmetric behavior across the left and right side. Although this assumption of bilateral symmetry is prominent, few studies have validated this supposition. This pilot study uniquely quantifies peak...
-
2016-01-01
Advances in robotic medical technologies have enabled an emerging generation of upper limb prostheses capable of moving with the same complexity and fluidity as a human arm. Yet even the most advanced commercially available systems are unable to communicate sensations of touch and movement to the...
-
2017-01-01
The image depicts a robotic hand expressing its identity through self-portraiture, challenging the viewer to reconsider the role of a prosthetic hand as simply a crude replacement. While this level of dexterity and intelligence is still beyond the capabilities of prosthetic limbs, it is entirely...