Search
Skip to Search Results- 117Chemical and Materials Engineering, Department of
- 112Chemical and Materials Engineering, Department of/Research Articles and Materials (Chemical and Materials Engineering)
- 8Surgery, Department of
- 8Surgery, Department of/Orthopaedic Surgery
- 5Chemical and Materials Engineering, Department of/Process Systems Engineering
- 3Human Ecology, Department of
- 14Rapid Solidification
- 12Impulse Atomization
- 11Undercooling
- 8Cryopreservation
- 7Atomization
- 7Microstructure
-
Time Dependence of Hydrogen Induced Cracking of X70 Pipeline Steel under Severe and Mild Sour Service Conditions using Ultrasonic Analysis
Download2020-01-01
Gawor, S., Wiskel, J.B., Ivey, D.G., Liu, J., Henein, H.
A standard NACE hydrogen induced crack test was used to evaluate the resistance of two compositions of X70 steel (X70-X (Ca/S ratio of 2.5) and X70-B (Ca/S ratio of <0.5)) under severe (pH = 2.7 and 100% H2S) and mild (pH = 5.5 and 100% H2S) sour service conditions. An ultrasonic technique was...
-
2020-01-01
Henein, H., Bogno, A.-A., Hearn, W., Valloton, J.
Cubic metallic alloys generally grow along 〈100〉 directions due to the anisotropy of the solid-liquid interfacial energy. Under rapid solidification conditions, dendrites may deviate from 〈100〉 and develop unusual morphologies. Here, Al-alloy droplets (Al-4.5Cu, Al-10Si, Al-1.9Fe, Al-33Cu, all in...
-
A Hierarchical Constrained Reinforcement Learning for Optimization of Bitumen Recovery Rate in a Primary Separation Vessel
Download2020-01-01
Shafi, Hareem, Velswamy, Kirubakaran, Ibrahim, Fadi, Huang,Biao
This work proposes a two-level hierarchical constrained control structure for reinforcement learning (RL) with application in a Primary Separation Vessel (PSV). The lower level is concerned with servo tracking and regulation of the interface level against variances in ore quality by manipulating...
-
State-of-the-art iridium-based catalysts for acidic water electrolysis: a minireview of wet-chemistry synthesis methods
Download2020-09-30
Himanshi Dhawan, Natalia Semagina, Marc Secanell
With the increasing demand for clean hydrogen production, both as a fuel and an indispensable reagent for chemical industries, acidic water electrolysis has attracted considerable attention in academic and industrial research. Iridium is a well-accepted active and corrosion-resistant component of...
-
Effects of Solidification Thermal Parameters and Bi Doping on Silicon Size, Morphology and Mechanical Properties of Al 15wt.% Si 3.2wt.% Bi and Al 18wt.% Si 3.2wt.% Bi alloys
Download2020-01-01
Dias, M., Oliveira, R., Kakitani, R., Cheung, N., Henein, H., Spinelli, J.E., Garcia, A.
The use of bismuth (Bi) in aluminum (Al) industries is recognized as prime importance because of possible recycling as alloying element in special applications such as those enhancing machinability. The effects of Bi interaction on solidification progress as well as on the resulting...
-
2019-01-01
Bogno, A.-A., Henein, H., Ivey, D.G., Valloton, J., Reinhart, G., Sediako, D., Gallerneault, M.
This paper reports on the characterization of rapidly solidified Al-4.5 wt% Cu-xSc (x= 0.1, 0.2 or 0.4 wt %). The effect of micro-additions of Sc (up to 0.4 wt %) was examined through microstructural analysis of rapidly solidified, as well as aged samples, by means of electron microscopy, x-ray...
-
2019-01-01
El Moghazi, S.N., Wolfe, T., Ivey, D.G, Henein, H.
Plasma transferred arc additive manufacturing is a growing technology in the additive manufacturing world. The plasma transferred arc additive manufacturing system’s ability to produce large samples, compared with other common additive manufacturing techniques, makes it highly desirable in many...
-
Final Report for Creative Sentencing: Protecting Worker Safety in Alberta by Enhancing Field Level Hazard Assessments and Training for Ground Hazards Associated with Tailings Facilities, Dams, and Systems
Download2019-03-20
Baker, Kathleen, Macciotta, Renato, Hendry, Michael T, Lefsrud, Lianne M
Efforts related to the safety and performance of oil sands tailings storage and transportation facilities have traditionally focused on preventing catastrophic failures and are well defined by government legislation and industrial best practices. However, a recent death related to ground hazards...
-
2019-01-01
Valloton, J., Bogno, A.-A., Henein, H., Herlach, D.M., Sediako, D.
This paper reports on the undercooling and growth morphology of Al-4.5wt%Cu and Al-4.5wt%Cu-0.4wt%Sc with a focus on the effect of Sc addition. It is found that the addition of Sc reduces the undercoolings of both primary phase and eutectic. In addition, the morphology of the Al-4.5wt%Cu-0.4wt%Sc...
-
2019-01-01
Preparative chromatography is an indispensable separation process in the food, pharmaceuticals and fine chemical industry. The aim of this work is to summarize developments in preparative chromatographic processes in the period 2009– 2012. Particular attention is paid to new developments in the...