Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Badiozamani Tari Nazari, Mohammad Mahdi
- 1Baker, Kathleen E.N.
- 1Beier, Nicholas A
- 1Boudreau, Wyatt
- 20Department of Chemical and Materials Engineering
- 17Department of Civil and Environmental Engineering
- 5Department of Renewable Resources
- 4Department of Earth and Atmospheric Sciences
- 3Department of Mechanical Engineering
- 2Department of Political Science
- 2Gamal El-Din, Mohamed (Civil and Environmental Engineering)
- 2Soares, Joao (Chemical and Materials Engineering)
- 2Ulrich, Ania (Department of Civil and Environmental Engineering)
- 2Zeng, Hongbo (Chemical and Materials Engineering)
- 1Amit Kumar (Mechanical Engineering)
- 1Askari-Nasab, Hooman (Civil and Environmental Engineering)
-
Spring 2012
Tailing ponds in Northern Alberta has covered an area of 170 km2. Directive 074 issued in 2009 set stringent criteria for tailings reclamation. Freeze-thaw dewatering is one of the most promising approaches for dewatering MFT as one cycle of freeze-thaw can release up to 50% pore water. In this...
-
Life Cycle Assessment of Transportation Fuels from Canada’s Oil Sands through Development of Theoretical Engineering Models
DownloadFall 2014
Oil sands in Canada are significant in fulfilling the current and the future energy demands of North America. The development of these resources, besides the increased awareness in global carbon management, has given way to various policy regulations such as the Low Carbon Fuel Standard (LCFS)...
-
Fall 2011
One of the major issues in the current oil sands waste management techniques is a lack of a direct linkage between the long-term mine plans and the quantity of the tailings produced downstream. This research is focused on developing a linkage between oil sands long-term mine plans and the final...
-
Spring 2013
The mining of oil sands ore and extraction of bitumen produces aqueous slurries containing bitumen, coarse sand and fine clays. The performance of key process units is highly dependent on the rheology of “carrier fluid”, which is comprised of the fine solids and water. Although viscosity is...
-
Fall 2017
The focus of the research presented here was to directly measure actual evaporation rates from a tailings surface using a micrometeorological technique known as the eddy covariance method. Depending on the results, it would be determined whether current drying models need to be calibrated with...
-
Methane Production and Emission Mitigation in Oil Sands Tailings Concurrent with Hydrocarbon Degradation under Nitrogen Limited Conditions
DownloadFall 2020
Alberta’s oil sands generate large volumes of tailings from bitumen ore processing. These tailings ponds produce biogenic methane, which can be measured across 60-80% of the tailings surface. Based on current surface area data and emissions studies, tailings ponds could account for 8% of Canada’s...
-
Spring 2010
Molecular dynamics simulation and density functional theory were applied to calculate heats of immersion (ΔHimm) of n-heptane, toluene, pyridine and water on two model sand surfaces and two model clay surfaces. Our results indicated that water showed the highest ΔHimm for the model clay surfaces...
-
Morphological Effects of Water Soluble Polymer Flocculants Synthesized by Controlled Reversible-Deactivation Radical Polymerization for Treatment of Mature Fine Tailings
DownloadFall 2020
The bitumen reserves in Northern Alberta are a valuable asset, but extracting bitumen from oil sands via the Clark hot water process produces undesirable waste tailings. These tailings are transported to tailings ponds where the sand and clay particles are left to settle slowly, creating a...
-
Near-Wellbore Salinity Effect on Sand Control Plugging by Fines Migration in Steam-Assisted Gravity Drainage Producer Wells
DownloadFall 2023
Sand control screens are necessary for steam-assisted gravity drainage (SAGD) wells drilled into oil sands to prevent sand production. However, the accumulation of mobilized fine particles near the wellbore can result in screen plugging, adversely affecting the well's flow performance. This...
-
Spring 2017
Oilsands tailings are a waste product comprising primarily a stable alkaline suspension of clay in water. This waste product of oilsands mining is environmentally hazardous to store and expensive to safely dispose of. This work presents two novel ideas for dealing with the waste. The first is...