Search
Skip to Search Results- 14Graduate and Postdoctoral Studies (GPS), Faculty of
- 14Graduate and Postdoctoral Studies (GPS), Faculty of/Theses and Dissertations
- 5Chemical and Materials Engineering, Department of
- 5Chemical and Materials Engineering, Department of/Research Articles and Materials (Chemical and Materials Engineering)
- 1Civil and Environmental Engineering, Department of
- 1Civil and Environmental Engineering, Department of/Structural Engineering Reports
- 4Mendez, Patricio (Chemical and Materials Engineering)
- 2Driver, Robert (Civil and Environmental Engineering)
- 2Henein, Hani (Chemical and Materials Engineering)
- 1D.G. Ivey (Chemical and Materials Engineering)
- 1Dr. Douglas Ivey, Department of Chemical and Materials Engineering
- 1Dr. Hani Henein, Department of Chemical and Materials Engineering
-
Characterization of HAZ of API X70 Microalloyed Steel Welded by Cold-wire Tandem Submerged Arc Welding.
Download2016-01-01
Mohammadijoo, M., Kenny, S., Ivey, D.G., Collins, L., Henein, H.
High strength low carbon microalloyed steels may be adversely affected by the high heat input and thermal cycle that they experience during tandem submerged arc welding (TSAW). The heat affected zone (HAZ), particularly the coarse grained heat affected zone (CGHAZ), i.e., the region adjacent to...
-
Fall 2019
Residual stresses can have a significant impact on the stability of structural members. In the case of I-section beam elements, such stresses can impact lateral--torsional buckling (LTB) capacity, particularly in the inelastic range. I-sections are typically fabricated by either rolling as a...
-
CHARACTERIZATION OF X80 AND X100 MICROALLOYED PIPELINE STEEL USING QUANTITATIVE X-RAY DIFFRACTION
Download2018-01-01
Wiskel, J.B., Li, X., Ivey, D.G., Henein, H.
Quantitative X-ray diffraction characterization of four (4) X80 and three (3) X100 microalloyed steels was undertaken. The effect of through thickness position, processing parameters and composition on the measured crystallite size, microstrain and J index (relative magnitude of crystallographic...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...
-
Spring 2017
During the past several decades, the relationship between microstructure and mechanical properties of high strength microalloyed steels has been extensively studied in an effort to improve the fracture toughness and strength of these types of steels, without appreciably increasing steel...
-
Effects of Submerged Arc Weld (SAW) Parameters on Bead Geometry and Notch-Toughness for X70 and X80 Linepipe Steels
DownloadFall 2009
For the manufacture of higher strength pipelines to be feasible, a better understanding of the effects of welding on toughness is necessary. Bevel submerged arc welds were performed on X80 grade steel. The subsequent Charpy V-notch (CVN) test results indicated that the notch placement in the...
-
Spring 2017
Heat distribution measurements in Gas Metal Arc Welding (GMAW) were concurrently measured at the cathode and anode giving increased insight and prediction capabilities. A calorimeter and water cooled cathode were used to determine energy partitions in GMAW for various electrodes, currents,...
-
Finite Element Model of the Thermal Profile During Submerged Arc Welding with One and Two Electrodes
DownloadFall 2016
The submerged-arc welding (SAW) process is used extensively in the manufacturing of pipes. The heat flow introduced by the welding operation has a significant impact on the properties of both the weld metal and the heat affected zone (HAZ). The work presented in this thesis aims to develop a...