Search
Skip to Search Results- 16Graduate and Postdoctoral Studies (GPS), Faculty of
- 16Graduate and Postdoctoral Studies (GPS), Faculty of/Theses and Dissertations
- 1ERA General Collection
- 1ERA General Collection/Supplementary Thesis Materials (ERA General)
- 1Civil and Environmental Engineering, Department of
- 1Civil and Environmental Engineering, Department of/Research Materials (Civil & Environmental Engineering)
- 2Liu, Qingxia (Chemical and Materials Engineering)
- 2Xu, Zhenghe (Chemical Engineering)
- 2Zeng, Hongbo (Chemical and Materials Engineering)
- 1Bhattacharjee, Subir (Mechanical Engineering)
- 1Gray, Murray (Chemical and Materials Engineering)
- 1Jacob Masliyah (Department of Chemical & Materials Engineering)
-
Fall 2016
Asphaltenes are the heaviest component in crude oil and bitumen. The molecular interactions and interfacial behaviours of asphaltenes are closely related to many challenging issues in oil production, which are believed to play an important role in stabilizing water-in-oil (W/O) and oil-in-water...
-
Spring 2015
Aiming to pursue studying enhanced oil recovery processes with an ex-situ produced emulsion as flooding agent, an improved core flooding experimental system was designed, constructed and commissioned. The developed system allows the use of not only emulsion, but also other flooding agents,...
-
Organically-Modified Clay Minerals in Oil Sands: Characterization and Effect of Hydrothermal Treatment
DownloadFall 2017
The intimate association between bitumen components and clay minerals is an important feature of oil sands fine solids. These organically-modified clay minerals cause serious problems in Canadian oil sands production: hindering bitumen extraction, stabilizing water-in-bitumen emulsions, fouling...
-
Spring 2010
There are several technical challenges in large scale heavy oil processing. In the oil sand industry, for example, the existence of water-in-oil emulsion in diluted bitumen produced from froth treatment presents a great challenge to the industry. In this work, the effect of different bitumen...
-
Studying Structure-Nanoaggregation Relations of Polyaromatic Molecules in the Bulk Oil Phase and at the Oil-Water Interface Using Molecular Dynamics Simulation
DownloadSpring 2014
The detection, identification and characterization of early stage molecular association of polyaromatic molecules into nanoaggregates, where these nanoaggregates represent the first level of molecular clusters or building blocks are critical in areas such as design and fabrication of advanced 3-D...
-
Spring 2022
Naphthenic Froth Treatment (NFT) is employed to remove water droplets and solids from the bitumen froth recovered from the extracted oilsands ore. In the process, bitumen froth is diluted with naphtha to reduce the viscosity and induce density difference to promote settling of water droplets and...
-
Spring 2017
Interactions mechanisms of deformable air bubbles and liquid droplets play critical roles in many established and modern industrial processes. Understanding the interaction mechanisms of oil droplets and air bubbles is of fundamental and practical importance to solve many challenging issues,...
-
Understanding stability of water-in-diluted bitumen emulsions by colloidal force measurements
DownloadSpring 2011
Removal of emulsified water is a challenge in oil sands and heavy oil processing. The flocculation and coagulation of emulsified water droplets depend on the interactions between the water droplets covered mainly by asphaltenes and oil-contaminated fine solids. To quantitatively evaluate the...