Search
Skip to Search Results- 1Beltaos, Angela M
- 1Bullock, Dallin S
- 1Davis, Matthew, B
- 1Dickau, Matthew A
- 1Dwyer, Stephen C
- 1Dyck, Caleb B
-
Spring 2023
Despite accounting for a tiny percentage of total construction expenses, a wasteful design process is more likely to cause delays or errors, resulting in low productivity, budget overrun, undesirable outputs and wasting resources. This study aims to examine the design process through Lean...
-
A Lean Approach to System Design and the Development of a Multi-Stage Dredging System for Commercial Applications
DownloadSpring 2023
The development of any technology requires that a balance must be struck between meeting requirements and dealing with constraints. This thesis presents a lean approach to the initial design and development of a complex, multi-physics system for industrial implementation, undertaken due to...
-
Spring 2017
A project methodology is proposed that is suitable for small teams working on the design of mechatronic systems. It is an alternative to a waterfall development method, which presents challenges when project uncertainty and risk are high. The method focuses on agility, iteration, feedback and...
-
Boxed-in: Comparing Algorithms for Box-flight Mass-Balance Greenhouse Gas Flux Measurements from Mineable and In Situ Oil Sands Developments
DownloadSpring 2022
To combat global warming, Canada has committed to reducing greenhouse gases (GHGs) 40-45% below 2005 emission levels by 2025. Monitoring emissions and deriving accurate inventories are essential to reaching these goals. GHGs can be measured at a small scale, often using ground measurements which...
-
Characterization of Particulate Emissions of Homogeneous Charge Compression Ignition Engines
DownloadFall 2013
The particle size distribution, volatility, and effective density of particulate matter are measured using a cooperative fuel research engine during motoring, spark ignition, and homogeneous charge compression ignition. For all operating modes, less than 5% of the particulate mass remains when...
-
Characterization of Particulate Matter Morphology and Volatility for Two Direct-Injection Engines
DownloadFall 2015
Particulate matter emitted from two direct injection engines has been characterized by morphology, volatility, mass-mobility exponent, effective density, and size distribution using tandem measurements from a centrifugal particle mass analyzer (CPMA) and differential mobility analyzers (DMA). The...
-
Design and Construction of a Temperature Cell to Study the Effect of Temperature Rise on Particle-Drop Impact
DownloadFall 2013
An experimental device aimed at simulating interactions in a fluidization process was designed, built, and tested to allow future study of drop-particle impact at high temperatures. The design parameters were defined based on theoretical investigations. A feasibility study were developed using...
-
Design and Validation of a Practical Simulator for the Development of Basic Nasal Endoscopy Skills in Otolaryngology – Head and Neck Surgery
DownloadFall 2015
Diagnostic nasal endoscopy is the standard procedure used by Otolaryngology – Head and Neck (OHNS) surgeons in detecting and treating conditions of the nose and sinuses. Due to a reduction in time resources towards surgical residency programs, OHNS residents have less access to hands-on patient...
-
Spring 2021
Hand injuries, due to impact, are common workplace injuries. Many work gloves afford impact protection through design of add-on components known as bumpers. Glove design criteria are complex (e.g., limitations from human factors, dexterity, use case, hand size variability) and commercial bumpers...
-
Design, Simulation and Evaluation of Effective Industrial Information Systems: Case of Machine Condition Monitoring and Maintenance Management Information Systems
DownloadFall 2013
Industrial information systems can improve the management of industrial operations by providing relevant and timely information on the status of physical assets via condition and process monitoring systems, and by enabling the effective use of data by systems and processes that restore proper...