Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Baker, Kathleen E.N.
- 1Baldygin, Aleksey
- 1Bhargava, Aakanksha
- 1Brandon, Jordan T
- 25Department of Chemical and Materials Engineering
- 10Department of Civil and Environmental Engineering
- 6Department of Mechanical Engineering
- 5Department of Renewable Resources
- 4Department of Earth and Atmospheric Sciences
- 1Chemical and Materials Engineering
- 4Zeng, Hongbo (Chemical and Materials Engineering)
- 3Liu, Qingxia (Chemical and Materials Engineering)
- 3Xu, Zhenghe (Chemical Engineering)
- 3Xu, Zhenghe (Chemical and Materials Engineering)
- 2Gray, Murray (Chemical and Materials Engineering)
- 2Ulrich, Ania (Department of Civil and Environmental Engineering)
-
Fall 2011
One of the major issues in the current oil sands waste management techniques is a lack of a direct linkage between the long-term mine plans and the quantity of the tailings produced downstream. This research is focused on developing a linkage between oil sands long-term mine plans and the final...
-
Methane Production and Emission Mitigation in Oil Sands Tailings Concurrent with Hydrocarbon Degradation under Nitrogen Limited Conditions
DownloadFall 2020
Alberta’s oil sands generate large volumes of tailings from bitumen ore processing. These tailings ponds produce biogenic methane, which can be measured across 60-80% of the tailings surface. Based on current surface area data and emissions studies, tailings ponds could account for 8% of Canada’s...
-
Fall 2016
Asphaltenes are the heaviest component in crude oil and bitumen. The molecular interactions and interfacial behaviours of asphaltenes are closely related to many challenging issues in oil production, which are believed to play an important role in stabilizing water-in-oil (W/O) and oil-in-water...
-
Spring 2010
Molecular dynamics simulation and density functional theory were applied to calculate heats of immersion (ΔHimm) of n-heptane, toluene, pyridine and water on two model sand surfaces and two model clay surfaces. Our results indicated that water showed the highest ΔHimm for the model clay surfaces...
-
Near-Wellbore Salinity Effect on Sand Control Plugging by Fines Migration in Steam-Assisted Gravity Drainage Producer Wells
DownloadFall 2023
Sand control screens are necessary for steam-assisted gravity drainage (SAGD) wells drilled into oil sands to prevent sand production. However, the accumulation of mobilized fine particles near the wellbore can result in screen plugging, adversely affecting the well's flow performance. This...
-
Spring 2015
Aiming to pursue studying enhanced oil recovery processes with an ex-situ produced emulsion as flooding agent, an improved core flooding experimental system was designed, constructed and commissioned. The developed system allows the use of not only emulsion, but also other flooding agents,...
-
Spring 2013
A major barrier to reclamation after oil sands mining is lack of commercially available, diverse native plant seeds and propagules for revegetation. Potential of LFH (forest floor material) developed on coarse textured soil for establishing native plants and how salvage, placement and storage...
-
Oil Upgrading by Molecular Rearrangement and Cracking: A Study Using Model Compounds and Natural Chabazite
DownloadFall 2015
As demand for fuel increases, new technologies that can convert heavy oil and bitumen into light fuels are needed. Natural zeolites have been proven to catalyze reactions that decrease molecular weight, density, nitrogen, and metals content as well as vacuum residue content when mixed with raw...
-
Organically-Modified Clay Minerals in Oil Sands: Characterization and Effect of Hydrothermal Treatment
DownloadFall 2017
The intimate association between bitumen components and clay minerals is an important feature of oil sands fine solids. These organically-modified clay minerals cause serious problems in Canadian oil sands production: hindering bitumen extraction, stabilizing water-in-bitumen emulsions, fouling...
-
Fall 2020
Oil sands mining is a significant disturbance in the Canadian boreal forest. One objective for reclamation after mining is to create a self-sustaining ecosystem, which includes establishing a native plant community. For this thesis, study one evaluates the different plant assembly mechanisms,...