Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Amoako, Kwaku Akrofi
- 1Archibald, Heather Anne
- 1Badiozamani Tari Nazari, Mohammad Mahdi
- 1Baker, Kathleen E.N.
-
Fall 2013
The high degree of variability of oil sands ores can be attributed to a mixture of different geological end members, i.e., estuarine sand, estuarine clay, marine sand and marine clay. This study focused on the mineralogy, especially of clay minerals, and toluene insoluble organic matter, referred...
-
Characterization of Clay Minerals in the Athabasca Oil Sands in Water Extraction and Nonaqueous Solvent Extraction Processes
DownloadFall 2011
Production of oil from the second largest oil deposit in the world, i.e., the Alberta oil sands containing approximately 13% of total proven oil reserves in the world (169.9 billion barrels), has been shown to be significantly influenced by clay minerals. Clay minerals in particular play a key...
-
Spring 2018
Pennetta de Oliveira, Leonardo
Bitumen has been extensively extracted from oil sands through the Clark Hot Water Extraction (CHWE) process. This extraction process uses hot water and alkaline conditions to remove bitumen from oil sands ores. The tailings produced by this process are mixtures of sand, clays, residual bitumen,...
-
Colloid Science of Sand Remediation: A Study Motivated by the Non-Aqueous Extraction of Bitumen from Oil Sands
DownloadFall 2014
The current water-based method of bitumen extraction requires withdrawal of fresh water from the Athabasca River — a practice which leads to the continual buildup of tailings ponds and other environmental concerns. As Alberta’s bitumen production is expected to more than double by 2020, there is...
-
Fall 2018
Improving water quality by inducing agricultural producers to implement Beneficial Management Practices (BMPs) is one of the top environmental concerns in Canada and worldwide. Conservation auctions can be a cost-effective mechanism to achieve this goal. The first two papers in this thesis focus...
-
Spring 2017
Achieving forest recovery on previously forested well sites in northern Alberta is an on-going challenge for the oil and gas industry. Thirty-three experimental oil sands exploration (OSE) sites were constructed and reclaimed between 2004 and 2006 in northeastern Alberta. Our goal was to...
-
Fall 2017
The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...
-
Fall 2014
The formation of stable water-in-oil emulsions during bitumen extraction poses problems for water separation from diluted bitumen, which leads to equipment corrosion and catalyst fouling in downstream operations. Demulsifiers are used to break the stable emulsions and assist the separation of...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...
-
Spring 2015
This research aims to assist in the assessment of tailings management technologies through the development of a dynamic simulation model. The developed model (TMSim) incorporates the mine plan, various stages of dewatering including classification, pre- and post-deposition dewatering, and an...