Search
Skip to Search Results- 27Graduate and Postdoctoral Studies (GPS), Faculty of
- 27Graduate and Postdoctoral Studies (GPS), Faculty of /Theses and Dissertations
- 6Chemical and Materials Engineering, Department of
- 6Chemical and Materials Engineering, Department of/Research Articles and Materials (Chemical and Materials Engineering)
- 3Civil and Environmental Engineering, Department of
- 3Civil and Environmental Engineering, Department of/Structural Engineering Reports
-
Spring 2021
Abstract This tome is both a “solar” dissertation and a “lunar” grimoire that performs its own argument. Adepts of Modernism argues that the infamous “little magazines” of modernism conjured their own enlightened, reading “counter-publics” by exploiting the same strategies and tactics of...
-
Fall 2023
Steel fabricators and connection designers in the building construction industry often rely on traditional connection design methods, which involve using connection design software or spreadsheets to simulate and design connections with the goal of minimizing costs associated with fabrication and...
-
Spring 2013
20Cr-32Ni-1Nb stainless steel alloys are commonly used in hydrogen reformer manifolds for transporting hot hydrogen by-products at 750-950 celcius. After long periods of exposure, embrittling secondary carbides and intermetallic phases can precipitate at the grain boundaries which can drastically...
-
Characterization of HAZ of API X70 Microalloyed Steel Welded by Cold-wire Tandem Submerged Arc Welding.
Download2016-01-01
Mohammadijoo, M., Kenny, S., Ivey, D.G., Collins, L., Henein, H.
High strength low carbon microalloyed steels may be adversely affected by the high heat input and thermal cycle that they experience during tandem submerged arc welding (TSAW). The heat affected zone (HAZ), particularly the coarse grained heat affected zone (CGHAZ), i.e., the region adjacent to...
-
Fall 2019
Residual stresses can have a significant impact on the stability of structural members. In the case of I-section beam elements, such stresses can impact lateral--torsional buckling (LTB) capacity, particularly in the inelastic range. I-sections are typically fabricated by either rolling as a...
-
CHARACTERIZATION OF X80 AND X100 MICROALLOYED PIPELINE STEEL USING QUANTITATIVE X-RAY DIFFRACTION
Download2018-01-01
Wiskel, J.B., Li, X., Ivey, D.G., Henein, H.
Quantitative X-ray diffraction characterization of four (4) X80 and three (3) X100 microalloyed steels was undertaken. The effect of through thickness position, processing parameters and composition on the measured crystallite size, microstrain and J index (relative magnitude of crystallographic...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...
-
Spring 2018
It has become common for steel fabricators to find torsional loads included in the design documents of many industrial steel structures. These loads arise in wide-flange beam-to-column moment connections when the beam is subject to weak axis bending, which in turn, is transferred to the column as...