Search
Skip to Search Results- 63Bitumen
- 15Thermodynamics
- 12AFM
- 9Oil sands
- 8Atomic force microscopy
- 8Oil sands process-affected water
- 1Afshar, Shima
- 1Almadhoun, Mahmoud
- 1Amani, Mohammad Javad
- 1Anas Khalil Sidahmed
- 1Ball, Bruce Evart.
- 1Bhushan, Vivek
-
Development of Solvent Selection Criteria Based on Diffusion Rate, Mixing Quality, and Solvent Retrieval for Optimal Heavy-Oil and Bitumen Recovery at Different Temperatures
DownloadFall 2015
Heavy-oil and bitumen recovery requires high recovery factors to offset the extreme high cost of the process. Attention has been given to solvent injection for this purpose and it has been observed that high recoveries are achievable when combined with steam injection. Heavier (“liquid”) solvents...
-
Fall 2020
Concerns over the environmental impacts of thermal production methods for bitumen and heavy oil have led to the exploration of alternative technologies including solvent-assisted production methods. While solvent-assisted production methods have been studied extensively, apparent diffusion rates...
-
Fall 2009
The extraction of bitumen (heavy oil) from the oil sands is predominantly achieved through a water-based technology. This involves a slurrying process, typically called conditioning, which is categorized into three equally important steps: bitumen-sand liberation, bitumen coalescence, and...
-
Effect of Heat Exchanger Volume and Geometry on Power Output of a Low Temperature Difference Stirling Engine
DownloadFall 2022
This work presents the results of an investigation into heat exchanger design for low temperature difference Stirling engines (LTDSEs). The aim of this study was to determine if there is an optimum heat exchanger geometry for producing maximum power output for a LTDSE. There are multiple factors...
-
Spring 2014
In bitumen recovery from oil sands, a percentage of the bitumen is lost to tailings. The effect of fugitive bitumen on fines settling and consolidation in tailings ponds remains controversial. In the current study, the settling performance of mature fine tailings (MFT) in response to flocculant...
-
Spring 2017
The formation of stable water-in-oil emulsions during oil sands extraction process causes a number of operational issues, such as equipment corrosion, storage and transportation problems. One common method for emulsion breakup in industry is to use chemical demulsifiers. The chemical demulsifiers...
-
Exploring Atomic Force Microscopy To Probe Charge Transport Through Molecular Films And For The Development Of Combinatorial Force Microscopy
DownloadFall 2012
Since the invention of the atomic force microscope (AFM), this technology has had profound implications in the study of material science and molecular biology. The ability to visualize and perform quantitative analysis of the nanoscale properties of surfaces has provided great insights into...
-
Spring 2011
Extraction of hydrocarbons from an Athabasca oil sand slurry were conducted using supercritical carbon dioxide (SC-CO2). The oil sand was slurried to a 1:1 ratio with water and experiments were conducted using a laboratory-scale batch supercritical fluid extraction (SFE) system. Preliminary tests...
-
Extraction of Hydrocarbons from Bitumen and Bitumen-containing Process and Process Waste Streams using Supercritical Carbon Dioxide
DownloadSpring 2019
Extractions of hydrocarbons from bitumen and bitumen-containing process and process waste streams generated from surface mined oil sands were conducted using supercritical carbon dioxide (SC-CO2). Dynamic extractions were performed on a bench-scale batch supercritical fluid extraction (SFE)...
-
Spring 2010
New methods to fabricate nanometer sized structures will be a major driving force in transforming nanoscience to nanotechnology. There are numerous examples of the incorporation of nanoscale structures or materials enhancing the functionality of a device. Graphitic carbon is a widely used...