Search
Skip to Search Results- 1Ali, Mostafa A A
- 1Apan, Ioan-Tudor
- 1Beaton, Neil I.
- 1Bineshmarvasti, Baher
- 1Bisson, Teresa M
- 1Blake, Adam J.
-
An investigation of the strain field and inter-fragmentary movement of a broken hemi-pelvis
DownloadFall 2015
Pelvic fracture is considered a common and sometimes fatal injury. There are still developments in novel pelvic fixations. In order to investigate the performance of these fixations, a specialized testing set-up is required. Typically, the strains of a few selected points and the changes in the...
-
Fall 2023
Steel fabricators and connection designers in the building construction industry often rely on traditional connection design methods, which involve using connection design software or spreadsheets to simulate and design connections with the goal of minimizing costs associated with fabrication and...
-
Spring 2013
20Cr-32Ni-1Nb stainless steel alloys are commonly used in hydrogen reformer manifolds for transporting hot hydrogen by-products at 750-950 celcius. After long periods of exposure, embrittling secondary carbides and intermetallic phases can precipitate at the grain boundaries which can drastically...
-
Fall 2019
Residual stresses can have a significant impact on the stability of structural members. In the case of I-section beam elements, such stresses can impact lateral--torsional buckling (LTB) capacity, particularly in the inelastic range. I-sections are typically fabricated by either rolling as a...
-
Coal Liquefaction Liquid Quality: Influence of Temperature and Heating Approach on Solvent Extraction of Coal
DownloadFall 2014
This project evaluated the impact of reaction temperature and of additional heating steps on the quality of the liquids obtained from solvent extraction of a lignite coal with tetralin. The points of focus were the coal liquid yield, physical properties, aromatic content and iron pyrite...
-
Spring 2018
It has become common for steel fabricators to find torsional loads included in the design documents of many industrial steel structures. These loads arise in wide-flange beam-to-column moment connections when the beam is subject to weak axis bending, which in turn, is transferred to the column as...
-
Fall 2014
Mercury is an air pollutant emitted from coal fired power plants. Once released into the environment, mercury undergoes conversion to organomercury compounds, which cause health concerns for both humans and animals. Many studies have been completed with the goal of reducing mercury emissions...
-
Fall 2020
Modularization of buildings comes in several types, from prefabricated members to full volumetric models. Recently, the introduction of modular construction methods brought numerous benefits to the construction industry. Reducing construction time and costs together with improving quality and...
-
Diagenetic Controls on Hydrothermal Fluid Flow in the Osiris, Isis, and Isis East Carlin-Type Gold Showings, Nadaleen Trend, Yukon
DownloadFall 2015
Following ATAC Resources Ltd.’s 2010 discovery of the gold prospects in the Nadaleen Trend (Central Yukon), company geologists and consultants determined that Precambrian carbonate rocks within the trend contain large endowments of gold located in the hinges of anticlines and fault zones. ...