Search
Skip to Search Results- 2Hogan, James D.
- 2Kannan, Rangasayee
- 1Ali, Mostafa A A
- 1Bineshmarvasti, Baher
- 1Desalegne, Admasu S.
- 1Dewar, Matthew P
- 24Graduate and Postdoctoral Studies (GPS), Faculty of
- 24Graduate and Postdoctoral Studies (GPS), Faculty of/Theses and Dissertations
- 2Civil and Environmental Engineering, Department of
- 2Civil and Environmental Engineering, Department of/Structural Engineering Reports
- 2Mechanical Engineering, Department of
- 2Mechanical Engineering, Department of/Journal Articles (Mechanical Engineering)
- 5Driver, Robert (Civil and Environmental Engineering)
- 5Henein, Hani (Chemical and Materials Engineering)
- 2Imanpour, Ali (Civil and Environmental Engineering)
- 2Mitlin, David (Chemical and Materials Engineering)
- 2Thundat, Thomas (Chemical and Materials Engineering)
- 1Ben-Zvi, Amos (Chemical and Materials Engineering)
-
An investigation of the strain field and inter-fragmentary movement of a broken hemi-pelvis
DownloadFall 2015
Pelvic fracture is considered a common and sometimes fatal injury. There are still developments in novel pelvic fixations. In order to investigate the performance of these fixations, a specialized testing set-up is required. Typically, the strains of a few selected points and the changes in the...
-
Fall 2023
Steel fabricators and connection designers in the building construction industry often rely on traditional connection design methods, which involve using connection design software or spreadsheets to simulate and design connections with the goal of minimizing costs associated with fabrication and...
-
Spring 2013
20Cr-32Ni-1Nb stainless steel alloys are commonly used in hydrogen reformer manifolds for transporting hot hydrogen by-products at 750-950 celcius. After long periods of exposure, embrittling secondary carbides and intermetallic phases can precipitate at the grain boundaries which can drastically...
-
Fall 2019
Residual stresses can have a significant impact on the stability of structural members. In the case of I-section beam elements, such stresses can impact lateral--torsional buckling (LTB) capacity, particularly in the inelastic range. I-sections are typically fabricated by either rolling as a...
-
2019-07-15
Nicewicz, P., Sano, T., Hogan, James D.
The quasi-static compaction response of granular stainless steel 316 was studied under triaxial loading conditions using a confined crucible experiment apparatus, specifically looking at effects of the particle size (127 ± 34 μm, 309 ± 88 μm, 487 ± 98 μm)on mechanical behavior. The material...
-
Spring 2015
This thesis presents a thorough examination of the corrosion and fouling behaviour of crude oil at refining conditions on industrially applicable heat transfer surfaces. The depletion of light sweet crude oil reserves means that the processing of ever heavier and more sour crude oils is...
-
Spring 2018
It has become common for steel fabricators to find torsional loads included in the design documents of many industrial steel structures. These loads arise in wide-flange beam-to-column moment connections when the beam is subject to weak axis bending, which in turn, is transferred to the column as...
-
Fall 2020
Modularization of buildings comes in several types, from prefabricated members to full volumetric models. Recently, the introduction of modular construction methods brought numerous benefits to the construction industry. Reducing construction time and costs together with improving quality and...
-
-
Spring 2011
Stainless steel is one of the most commonly used materials in most industries. Excellent corrosion resistance of stainless steel is due to the formation of an oxide film on the surface (passive film), which protects the material from continuous corrosion attacks. When subjected to an attack...