Search
Skip to Search Results- 1Badiozamani Tari Nazari, Mohammad Mahdi
- 1Beier, Nicholas A
- 1Brown, Lisa D
- 1Crominski da Silva Medeiros, Deborah C.
- 1Duncan, Steven M
- 1Ewanchuk, Andrea Marie
- 3Joseph, Tim (Mining Engineering)
- 1Ania C. Ulrich (Department of Civil and Environmental Engineering)
- 1Babadagli, Tayfun (Civil Engineering)
- 1Babadagli, Tayfun (Petroleum Engineering)
- 1Bayat, Alireza (Civil and Environmental Engineering)
- 1Beier, Nicholas A. (Civil & Environmental Engineering)
-
Fall 2010
A study was conducted to evaluate the properties and processes influencing the rate and magnitude of volume decrease and strength gain for oil sand fine tailings resulting from a change in bitumen extraction process (caustic versus non-caustic) and the effect of adding a coagulant to caustic fine...
-
Fall 2010
This study investigates the extraction of hydrocarbons from oil sand using supercritical carbon dioxide (SC CO2). Experiments were carried out on three different types of oil sands. After some preliminary experiments, the feasibility of extracting hydrocarbons from oil sands by SC CO2 was...
-
Application of coagulation-flocculation process for treating oil sands process-affected water
DownloadFall 2011
Oil Sands Process-Affected Water (OSPW) is generated from oil sands operation processes such as mining, extraction, and upgrading. Currently, accumulated OSPW is temporarily stored in tailings ponds which are toxic to the environment and must be treated for either reuse or safe discharge in the...
-
Fall 2011
Fluorescence technology was examined as an analytical tool for identifying naphthenic acids in process-affected water. The fluorescence signal from process-affected water was narrowed down to the extractable organic acid fraction, known to contain naphthenic acids. A characteristic intensity...
-
Meeting the Water for Life challenge: Management scenarios to improve irrigation water use efficiency and reduce water demand in the Western Irrigation District, Alberta
DownloadFall 2012
Simulation of two alternative management scenarios - full rehabilitation and implementation of most efficient technologies, and water application restrictions - were investigated with the Irrigation Demand Model (IDM) as potential avenues to improve water use efficiency and reduce water demand in...
-
Fall 2012
Weigh-In-Motion (WIM) systems are used for dynamic traffic data collection. These sensors are capable of collecting various truck characteristics such as weights, speed, and dimensions. Alberta Transportation (AT) installed 20 WIM sensors in six different highway sections across Alberta in 2004....
-
Spring 2012
The Town of Peace River is over hundred years old. It was heavily urbanized by the late 1970s. Development extended to the geologically immature valley slopes of the Peace River and its tributaries. Triggered by various agents, landslides caused damage to houses and infrastructure developed on...
-
Removal of Organic and Inorganic Contaminants from Oil Sands Tailings using Carbon Based Adsorbents and Native Sediment
DownloadFall 2013
The extraction and refinement of oil sands bitumen produces substantial quantities of liquid tailings and solid coke. Tailings contain metals and naphthenic acids, which require remediation before mine closure. Adsorption is a potential remediation technique which may reuse stockpiled petroleum...
-
Heavy Oil/Bitumen Recovery by Alternate Injection of Steam and Solvent (Hydrocarbon and CO2) in Fractured Carbonates and Oilsands
DownloadFall 2013
The world energy demand is constantly increasing and fossil fuels are still by far the main energy resource that supplies the world energy consumption market, therefore increasing oil recovery from all types of reservoirs is an important matter. The burning of fossil fuels for energy purposes, on...