- 107 views
- 87 downloads
Life Cycle Assessment of Industrial Hemp and Hemp-Based Products in Canada
-
- Author / Creator
- Wu, Qifan
-
Industrial hemp is a versatile crop producing nutrient-rich hempseed and a large quantity of biomass. Bast fibre and hurd are excellent materials derived from hemp straw, while bioactive ingredients are extracted from flower heads and leaves. The environmental impacts associated with hemp production were well-studied in the EU. However, Life Cycle Assessment (LCA) studies of hemp produced in Canada were limited despite being one of the largest hemp-producing countries. This thesis aims to evaluate the hemp production system and hemp-based products manufactured in Canada using the LCA approach. With an increasing global focus on sustainability, this research fills an important gap in understanding the environmental impact of hemp production in Canada, and provides necessary data for the development of environmental product declarations (EPDs) of current and future hemp-based products. The production of hempseed and straw was investigated first, followed by assessing the manufacturing of bast fibre, hurd and nonwoven mats.
The cradle-to-farm gate assessment of hempseed and straw comprised foreground data collected from growers, the Canadian Hemp Trade Alliance (CHTA), National Hemp Variety Field Trial (NHVFT) 2022 results, and provincial hemp production guides. The cradle-to-factory gate analysis of hemp-based products collected information from the manufacturer. Data for the background processes were taken from LCA databases. One kg of hempseed and straw were used as functional units in the first study, while one tonne of hemp-based products was the functional unit in the second study.
The results from the first study showed that dual-purpose production of hempseed had the lowest environmental impacts when allocating by mass, followed by grain-only production scenario and dual-purpose hempseed with economic allocation. Hempseed production from
growers had lower footprints than that from NHVFT 2022 results and production guides. The Greenhouse Gas (GHG) emissions associated with hemp production in Canada were comparable to hemp produced in the EU. However, some LCA studies showed lower footprints than the present study due to higher yield, lower nutrient inputs and integration of organic fertilizer. The major contributors to GHG emissions were field emissions, fertilizer production, and field operations.
For the second study, bast fibre and hurd from co-harvested straw had the lowest production footprint when allocated by its market value, followed by fibre-only production of feedstock and co-harvested straw allocating by mass. A similar result was applied to the production of hemp-based nonwoven mats. The GHG emissions of hemp-based products were similar to those produced in the EU. Significant contributors to carbon footprints were hemp straw production and electricity consumed during manufacturing. Sensitivity analysis suggested that the use of higher quality and low carbon feedstock, low carbon intensity electrical energy, and dust significantly reduced overall GHG emissions.
The finding from this study provides benchmark information regarding hemp materials, which could be used in further investigations of hemp-based products. Long-term tracking of hemp production in Canada and site-specific environmental conditions will improve the accuracy of LCA and provide more representative results. -
- Subjects / Keywords
-
- Graduation date
- Fall 2024
-
- Type of Item
- Thesis
-
- Degree
- Master of Science
-
- License
- This thesis is made available by the University of Alberta Library with permission of the copyright owner solely for non-commercial purposes. This thesis, or any portion thereof, may not otherwise be copied or reproduced without the written consent of the copyright owner, except to the extent permitted by Canadian copyright law.