Search
Skip to Search Results- 1Abraham, Tinu M
- 1Adegoroye, Adebukola
- 1Afshar, Shima
- 1Amani, Mohammad Javad
- 1Bu, Weida
- 1Castillo Lugo, Javier
- 12Xu, Zhenghe (Chemical and Materials Engineering)
- 4De Klerk, Arno (Chemical and Materials Engineering)
- 4Liu, Qi (Chemical and Materials Engineering)
- 4Liu, Qingxia (Chemical and Materials Engineering)
- 4Masliyah, Jacob (Chemical and Materials Engineering)
- 3Sanders, Sean (Chemical and Materials Engineering)
-
Fall 2013
In industrial visbreaking processes, the conversion typically takes place at ~450 °C and the extent of conversion is limited by the coking propensity of the feed. Some of the older literature on bitumen upgrading reported that it was possible to substantially upgrade the straight run product at...
-
Spring 2010
The demand for accurate bitumen-pentane mass transfer data was the main motivation behind this research. Difficulties such as complex phase behavior, high viscosity and opacity of the hydrocarbon invariably lead to failure of conventional techniques to measure mass transfer coefficients...
-
Spring 2013
The mining of oil sands ore and extraction of bitumen produces aqueous slurries containing bitumen, coarse sand and fine clays. The performance of key process units is highly dependent on the rheology of “carrier fluid”, which is comprised of the fine solids and water. Although viscosity is...
-
Microwave Heating Of Non-Aqueous Oil Sands Extraction Gangue: Study Of Optimal Cyclohexane-Water Mass Ratio And Solvent Recovery Rate
DownloadFall 2023
Non-aqueous bitumen extraction processes (NAE) of mined oil sands ore have been investigated to circumvent the environmental and operating limitations of the current hot water-based technology. However, one primary challenge of NAE is a solvent recovery that meets environmental and economic...
-
Spring 2024
Malamace da Silva, Victor Hugo
The oil sands of Western Canada are among the most abundant and economically important unconventional petroleum resources. Hydrocarbon extraction from oil sands is conducted using warm water or in situ technologies that face considerable environmental challenges. Oil sands can also be valorized...
-
Fall 2013
The impact of mixing on water removal from diluted bitumen and bitumen froth is studied, with the goal of maximizing demulsifier performance. The relative effects of bulk concentration, mixing intensity, mixing time and injection concentration on the demulsifier performance are evaluated. A...
-
Natural Zeolite Catalysts for the Integrated Cracking, Waterless Extraction and Upgrading of Oilsands Bitumen
DownloadSpring 2012
Canadian oilsands bitumen represents one of the largest petroleum reserves in the world, but extraction of that resource raises significant environmental, operational and quality-related challenges. Current extraction processes are water intensive, generating high volume tailings ponds that are...
-
Spring 2017
Oilsands tailings are a waste product comprising primarily a stable alkaline suspension of clay in water. This waste product of oilsands mining is environmentally hazardous to store and expensive to safely dispose of. This work presents two novel ideas for dealing with the waste. The first is...
-
Fall 2011
The impact of mixing on diluted bitumen de-watering is studied in two stages using a fractional factorial design of experiments. The first stage evaluates the relative effects of bulk demulsifier dosage, local maximum energy dissipation, and mixing time. The second stage of experiments evaluates...