Search
Skip to Search Results- 1Abraham, Tinu M
- 1Adegoroye, Adebukola
- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Baker, Kathleen E.N.
- 1Bhargava, Aakanksha
-
Water-mediated adhesion of oil sands on solid surfaces at low temperature and possible solutions to mitigate adhesion
DownloadSpring 2022
Adhesion of frozen granular materials on solid surfaces creates various problems for surface cleaning, reduces the carrying capacity of vehicles, and increases energy consumption for inland transportation. Here in the first part of this thesis, water content demonstrates to determine the adhesion...
-
Understanding stability of water-in-diluted bitumen emulsions by colloidal force measurements
DownloadSpring 2011
Removal of emulsified water is a challenge in oil sands and heavy oil processing. The flocculation and coagulation of emulsified water droplets depend on the interactions between the water droplets covered mainly by asphaltenes and oil-contaminated fine solids. To quantitatively evaluate the...
-
Spring 2017
Interactions mechanisms of deformable air bubbles and liquid droplets play critical roles in many established and modern industrial processes. Understanding the interaction mechanisms of oil droplets and air bubbles is of fundamental and practical importance to solve many challenging issues,...
-
Spring 2011
Thin film pyrolysis was used to thermally crack the pendant groups from asphaltene molecules. The cracked products were rapidly quenched to minimize further decomposition. The liquid products were condensed and collected, with over 91% material balance on the recovery of gas, liquid and coke...
-
Spring 2022
Naphthenic Froth Treatment (NFT) is employed to remove water droplets and solids from the bitumen froth recovered from the extracted oilsands ore. In the process, bitumen froth is diluted with naphtha to reduce the viscosity and induce density difference to promote settling of water droplets and...
-
Studying Structure-Nanoaggregation Relations of Polyaromatic Molecules in the Bulk Oil Phase and at the Oil-Water Interface Using Molecular Dynamics Simulation
DownloadSpring 2014
The detection, identification and characterization of early stage molecular association of polyaromatic molecules into nanoaggregates, where these nanoaggregates represent the first level of molecular clusters or building blocks are critical in areas such as design and fabrication of advanced 3-D...
-
Spring 2010
Canada has the largest known reserve of oil in the world in the form of oil sands: an estimated 1.7 to 2.5 trillion barrels of oil are deposited in combination of the sand, water and clay. The presented research is devoted to bubble-solid surface interaction, which is one of the critical areas...
-
Study of biodiesel-assisted ambient aqueous bitumen extraction (BA3BE) for hydrocarbon production from mineable oil sands
DownloadFall 2019
Surface mining followed by Clark’s hot water bitumen extraction (HWBE) process has been employed in the current mineable oil sands industry for massive bitumen production. This method is faced with numerous challenges such as high energy consumption, limited bitumen quality, production from...
-
Fall 2018
Many tailings treatment technologies rely on the use of water-soluble polyacrylamides (PAM) to flocculate fine solids. However, PAM-induced flocs are often loosely-structured and retain significant volume of water due to the hydrophilicity of PAM and fine clays in oil sands fine tailings....
-
Spring 2010
There are several technical challenges in large scale heavy oil processing. In the oil sand industry, for example, the existence of water-in-oil emulsion in diluted bitumen produced from froth treatment presents a great challenge to the industry. In this work, the effect of different bitumen...