Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Baker, Kathleen E.N.
- 1Brandon, Jordan T
- 1Brown, Daniel M.
- 1Chen, Liang
- 15Department of Chemical and Materials Engineering
- 12Department of Civil and Environmental Engineering
- 5Department of Renewable Resources
- 4Department of Earth and Atmospheric Sciences
- 2Department of Mechanical Engineering
- 1Chemical and Materials Engineering
- 2Shaw, John M. (Chemical and Materials Engineering)
- 2Ulrich, Ania (Department of Civil and Environmental Engineering)
- 2Yeung, Anthony (Chemical and Materials Engineering)
- 2Zeng, Hongbo (Chemical and Materials Engineering)
- 1Amit Kumar (Mechanical Engineering)
- 1Askari-Nasab, Hooman (Civil and Environmental Engineering)
-
Fall 2014
The non-aqueous extraction process involves dilution of mined oil sand with an organic solvent (the “diluent”), followed by separation of unwanted materials (clays, silica sand, connate water, etc.) from the diluted bitumen. The main focus of this research is on the removal of fines solids from...
-
Fall 2017
The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...
-
Fall 2014
The formation of stable water-in-oil emulsions during bitumen extraction poses problems for water separation from diluted bitumen, which leads to equipment corrosion and catalyst fouling in downstream operations. Demulsifiers are used to break the stable emulsions and assist the separation of...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...
-
Spring 2019
This thesis aims to demonstrate the feasibility of using System Dynamics (SD) techniques to develop a transparent, open-source and reproducible model capable of simulating long-term soil water dynamics in a tailings-cap system subject to upward flux from a consolidating tailings substrate. The...
-
Effect of Temperature, Phase Change, and Chemical Additive on Interfacial Properties and Performance of Steam Applications
DownloadFall 2019
When considering the wettability state during steam applications, we find that most issues remain unanswered. Removal of polar groups from the rock surface with increasing temperature improves water wettability; however, other factors, including phase change, play a reverse role. In other words,...
-
Spring 2020
Albertan oil sands ores are becoming more difficult to process efficiently as the clay content of the ore increases and the grade of the ore worsens. A key to improving the extraction of bitumen from low-grade oil sands, thereby increasing the longevity of this critical resource, is reducing the...
-
Estimation of the Life Cycle Greenhouse Gas Emissions of Bitumen-Derived Petroleum Fuels using Enhanced Solvent Extraction Incorporating Electromagnetic Heating (ESEIEH) and Toe-to-Heel Air Injection (THAI) Extraction Technologies
DownloadSpring 2019
There is increased focus on reduction of greenhouse gas (GHG) emissions to reduce global warming. Combustion of fossil fuels are a key contributor to emissions of GHG. Alberta is the largest hydrocarbon base in North America due to its oil sands deposit. Bitumen from oil sands is refined to...
-
Extraction of Hydrocarbons from Bitumen and Bitumen-containing Process and Process Waste Streams using Supercritical Carbon Dioxide
DownloadSpring 2019
Extractions of hydrocarbons from bitumen and bitumen-containing process and process waste streams generated from surface mined oil sands were conducted using supercritical carbon dioxide (SC-CO2). Dynamic extractions were performed on a bench-scale batch supercritical fluid extraction (SFE)...
-
Spring 2019
This thesis contributes to the development of chronological and geological frameworks for the archaeological record of the mineable oil sands regions in northeastern Alberta, Canada. This area contains a rich pre-European contact archaeological record that has largely been documented through...