Search
Skip to Search Results- 1Ali, Mostafa A A
- 1Bineshmarvasti, Baher
- 1Borle, Steven D
- 1Dewar, Matthew P
- 1Dueck, Meghan, E
- 1Duong, Eric
-
Fall 2021
Newer energy codes for buildings in Canada now require energy losses associated with thermal bridging in smaller components to be accounted for. In masonry cavity wall systems, most of the energy losses from thermal bridging are due to structural penetrations at floor levels located at the shelf...
-
Spring 2012
It is difficult to join high strength alloy steel which are produced by thermo mechanical controlled processing and get overmatched properties on the welds and heat affected zone (HAZ) when submerged arc welding (SAW) is used as joining process. Circumferential welds made in the mill to join...
-
The Role of Sulfur Species in Establishing the Corrosion Reactions in Refinery Metallurgies
DownloadSpring 2016
This thesis is focused on the studying the role that model sulfur-containing molecules have in corrosion reactions on relevant metallurgies. This was done by using a design of experiments where a number of sulfur-based compounds were reacted with various metallurgies. The 8 model sulfur compounds...
-
Spring 2015
Traditionally in pipeline steels and welds, ultrasonic testing (UT) has been used for crack and/or flaw detection. The work presented in this Thesis explores the use of this technique to characterize the microstructure of pipe steels. Ultrasonic velocity calculations, for shear and longitudinal...
-
Spring 2020
ML80 and Grade 483 are heat treatable steels, produced by a quench and temper process, that are used in the oil and gas industry. The development of the microstructure during heat treatment is important to ensure that the correct properties are achieved for these steels. However, a real-time...
-
Fall 2010
Ductile steel plate shear walls are an established lateral load resisting system. Past research indicates that cold-rolled infill panels less than 1 mm in thickness present one solution to an overstrength problem arising from selecting an infill panel thickness based on ease of welding and...