Search
Skip to Search Results- 1Bineshmarvasti, Baher
- 1Danilovic, Nemanja
- 1Garcia Rojas, Alfonso Andres
- 1Kannan, Rangasayee
- 1Kennedy, Jacob R
- 1Lepore, Justin N
- 4Henein, Hani (Chemical and Materials Engineering)
- 2Luo, Jingli (Chemical and Materials Engineering)
- 1Ben-Zvi, Amos (Chemical and Materials Engineering)
- 1Chuang, Karl (Chemical and Materials Engineering)
- 1Henein, Hani (Materials Engineering)
- 1Ivey, Douglas (Chemical and Materials Engineering)
-
Spring 2010
Novel anode catalysts have been developed for sour natural gas solid oxide fuel cell (SOFC) applications. Sour natural gas comprises light hydrocarbons, and typically also contains H2S. An alternative fuel SOFC that operates directly on sour natural gas would reduce the overall cost of plant...
-
Fall 2017
Casing pipes used in sour service are prone to two forms of failure: hydrogen induced cracking (HIC) and sulfide stress cracking (SSC). The objective of this thesis is to investigate the resistance of L80 ERW and Seamless steel pipe, with five different chemical compositions, to both HIC and SSC....
-
Spring 2019
The formation of bainite is the most studied and the most debated phase transformation in steels, with research spanning almost a century. With two theories of transformation, the transformation mechanism of bainite is still a disputed subject among physical metallurgists. Upper bainite and lower...
-
Modeling of the Effect of Run-out Table Cooling on the Microstructure of a Thick Walled X70 Skelp
DownloadSpring 2018
This thesis presents work performed to model and measure the effect of run-out table cooling on a thick walled X70 steel. During run-out table cooling, the steel undergoes several phase transformations that will affect its microstructure, and thus, its mechanical properties. To predict the steel...
-
Spring 2015
The objective of this dissertation was to find novel adsorbents addressing problems associated with acid gases. They are the most common contaminants in multiple aspects of petroleum processing and combustion gas clean up, which reduce the efficiency of petroleum refining and product quality....
-
Fall 2011
Optimization techniques, in conjunction with a finite element thermal model, are used in this thesis to optimize the temperature profile (i.e. cooling rate and coiling temperature) of a steel skelp during laminar cooling. Optimization parameters include skelp velocity, laminar cooling bank...
-
The Role of Sulfur Species in Establishing the Corrosion Reactions in Refinery Metallurgies
DownloadSpring 2016
This thesis is focused on the studying the role that model sulfur-containing molecules have in corrosion reactions on relevant metallurgies. This was done by using a design of experiments where a number of sulfur-based compounds were reacted with various metallurgies. The 8 model sulfur compounds...
-
Spring 2015
Traditionally in pipeline steels and welds, ultrasonic testing (UT) has been used for crack and/or flaw detection. The work presented in this Thesis explores the use of this technique to characterize the microstructure of pipe steels. Ultrasonic velocity calculations, for shear and longitudinal...
-
Spring 2020
ML80 and Grade 483 are heat treatable steels, produced by a quench and temper process, that are used in the oil and gas industry. The development of the microstructure during heat treatment is important to ensure that the correct properties are achieved for these steels. However, a real-time...
-
Fall 2012
In this research, LSB10T/YSZ composite anode with VOx/TiO2 is used to improve the electrochemical performance, coking resistance and sulfur tolerance of high temperature SOFC fed by 5000 ppm H2S containing methane. The ionic and electronic conductivities of La0.4Sr0.5Ba0.1TiO3 were studied with...