Search
Skip to Search Results- 1Aldhaleai, Ahmed Mahmood
- 1Bozorg Bigdeli, Masoud
- 1Chen, Huanchen
- 1Chini, Seyed Farshid
- 1Ferraz Albani, Luis A
- 1Guha Thakurta, Subhayan
-
Fall 2014
This research comprises four integral parts. Each part focuses on one aspect of the general problem of drug delivery by respiration. The morphological features of human respiratory tract, the dynamics of inhaled pharmaceutical particles, and the mechanics of inhaler devices are particularly taken...
-
Characterization of the dissolved organic matter in steam assisted gravity drainage boiler blow-down water
DownloadFall 2012
The presence of high concentrations of dissolved organic matter (DOM) and total dissolved solids (TDS) in the boiler blow-down water (BBD) causes severe equipment fouling during the SAGD operation. For effective BBD management, a detailed understanding of the BBD chemistry is important. In this...
-
Spring 2013
Removal of a drop from its substrate may be gradually (e.g. evaporation) or all at once (e.g. shedding). In this thesis, drop adhesion force as a base for understanding the all at once removal of a drop from its substrate, and drop evaporation in room temperature as one of the gradual removal...
-
Dynamics of spontaneous initial spreading and spreading of a hydrodynamically driven droplet under the influence of surrounding pressure
DownloadFall 2021
We investigate experimentally the early time dynamics of spontaneous spreading of silicone oils with various viscosities at elevated surrounding pressures. The surrounding medium pressure is increased in a monotone fashion starting from atmospheric pressure to a maximum value of 30 megapascal...
-
Estimation of the Evaporation Rate of an Isolated Water Microdroplet Subjected to Infrared Radiative Heating
DownloadFall 2014
A combined numerical-experimental investigation was performed to study the influence of infrared radiation on the evaporation of a single-component droplet in the range between 10 and 50 micrometers, under different environmental conditions of relative humidity and temperature of air. A numerical...
-
Estimation of the Life Cycle Greenhouse Gas Emissions of Bitumen-Derived Petroleum Fuels using Enhanced Solvent Extraction Incorporating Electromagnetic Heating (ESEIEH) and Toe-to-Heel Air Injection (THAI) Extraction Technologies
DownloadSpring 2019
There is increased focus on reduction of greenhouse gas (GHG) emissions to reduce global warming. Combustion of fossil fuels are a key contributor to emissions of GHG. Alberta is the largest hydrocarbon base in North America due to its oil sands deposit. Bitumen from oil sands is refined to...
-
Experimental investigation on evaporation induced convection in water using laser based measurement techniques
DownloadFall 2010
Recent studies showed that evaporation of water can induce surface tension gradients along the water surface and ultimately lead to convection, known as Marangoni convection. This study was devoted to visualization and characterization of the evaporation-induced, surface-tension-driven convection...
-
Fabrication and Characterization of Photolithographically Patterned Rough Surfaces Demonstrating Extreme Contact Angle Behavior
DownloadFall 2014
This thesis features experimental work done to fabricate and characterize silicon surfaces patterned using photolithographic techniques, both standard and novel, to produce a variety of surfaces with roughness of controlled geometric properties. In specific, one set of the surfaces fabricated...
-
Life Cycle Assessment of Transportation Fuels from Canada’s Oil Sands through Development of Theoretical Engineering Models
DownloadFall 2014
Oil sands in Canada are significant in fulfilling the current and the future energy demands of North America. The development of these resources, besides the increased awareness in global carbon management, has given way to various policy regulations such as the Low Carbon Fuel Standard (LCFS)...
-
Fall 2015
Drop transfer from one solid surface to another through stretching liquid bridges between them is important for many industrial applications. Due to the different dominate forces, three possible regimes exist: Quasi-static Regime, where the transfer process is only dominated by surface forces;...