Search
Skip to Search Results- 2Kannan, Rangasayee
- 1Ali, Mostafa A A
- 1Bineshmarvasti, Baher
- 1Danilovic, Nemanja
- 1Desalegne, Admasu S.
- 1Dewar, Matthew P
- 20Graduate and Postdoctoral Studies (GPS), Faculty of
- 20Graduate and Postdoctoral Studies (GPS), Faculty of/Theses and Dissertations
- 2Civil and Environmental Engineering, Department of
- 2Civil and Environmental Engineering, Department of/Structural Engineering Reports
- 1Chemical and Materials Engineering, Department of
- 1Chemical and Materials Engineering, Department of/Research Articles and Materials (Chemical and Materials Engineering)
-
2018-01-01
Kennedy, J.R., Wiskel, J.B., Ivey, D.G., Henein, H.
The potential exists to use ultrasonic shear velocity for real time microstructure assessment of the quenching step in the teat treatment of L80 steel pipe. L80 steel samples were austenitized and subsequently cooled in different quench mediums (water, oil, heated oil, air and furnace) to produce...
-
Spring 2019
The formation of bainite is the most studied and the most debated phase transformation in steels, with research spanning almost a century. With two theories of transformation, the transformation mechanism of bainite is still a disputed subject among physical metallurgists. Upper bainite and lower...
-
Modeling of the Effect of Run-out Table Cooling on the Microstructure of a Thick Walled X70 Skelp
DownloadSpring 2018
This thesis presents work performed to model and measure the effect of run-out table cooling on a thick walled X70 steel. During run-out table cooling, the steel undergoes several phase transformations that will affect its microstructure, and thus, its mechanical properties. To predict the steel...
-
Spring 2015
The objective of this dissertation was to find novel adsorbents addressing problems associated with acid gases. They are the most common contaminants in multiple aspects of petroleum processing and combustion gas clean up, which reduce the efficiency of petroleum refining and product quality....
-
Fall 2011
Optimization techniques, in conjunction with a finite element thermal model, are used in this thesis to optimize the temperature profile (i.e. cooling rate and coiling temperature) of a steel skelp during laminar cooling. Optimization parameters include skelp velocity, laminar cooling bank...
-
Fall 2021
Newer energy codes for buildings in Canada now require energy losses associated with thermal bridging in smaller components to be accounted for. In masonry cavity wall systems, most of the energy losses from thermal bridging are due to structural penetrations at floor levels located at the shelf...
-
2021-05-25
Sharma, Nitin Kumar, Kannan, Rangasayee, Hogan, James D., Fisher, Gary, Li, Leijun
Surface mining causes significant wear damage that affects equipment performance, reliability, and lead to associated downtime costs. To improve the wear resistance of components used in natural resources industries, cemented carbide tiles are joined to engaging surfaces of the components....
-
Shear Behaviour of Concrete Slabs and Beams Reinforced with High-Performance ASTM A1035 Steel
Download2013-09-30
Lubell, Adam S., Desalegne, Admasu S.
High-performance steel bars manufactured to conform to ASTM A1035-11 have different metallurgy and microstructure than conventional reinforcing steel. These changes result in an effective yield strength significantly higher than conventional ASTM A615 steel while also being less susceptible to...
-
Spring 2010
The ability to detect and quantify presence and concentration of unknown gasses is sought for applications ranging from environmental monitoring to medical analysis. Metal oxide based chemical sensing technology currently exists but the ability to provide a compositional gas breakdown reliably...
-
The Role of Sulfur Species in Establishing the Corrosion Reactions in Refinery Metallurgies
DownloadSpring 2016
This thesis is focused on the studying the role that model sulfur-containing molecules have in corrosion reactions on relevant metallurgies. This was done by using a design of experiments where a number of sulfur-based compounds were reacted with various metallurgies. The 8 model sulfur compounds...