Search
Skip to Search Results- 1Abraham, Tinu M
- 1Adegoroye, Adebukola
- 1Afshar, Shima
- 1Ali, Babkir SM
- 1Amani, Mohammad Javad
- 1Amoako, Kwaku Akrofi
-
Colloid Science of Sand Remediation: A Study Motivated by the Non-Aqueous Extraction of Bitumen from Oil Sands
DownloadFall 2014
The current water-based method of bitumen extraction requires withdrawal of fresh water from the Athabasca River — a practice which leads to the continual buildup of tailings ponds and other environmental concerns. As Alberta’s bitumen production is expected to more than double by 2020, there is...
-
Fall 2014
The non-aqueous extraction process involves dilution of mined oil sand with an organic solvent (the “diluent”), followed by separation of unwanted materials (clays, silica sand, connate water, etc.) from the diluted bitumen. The main focus of this research is on the removal of fines solids from...
-
Fall 2010
A study was conducted to evaluate the properties and processes influencing the rate and magnitude of volume decrease and strength gain for oil sand fine tailings resulting from a change in bitumen extraction process (caustic versus non-caustic) and the effect of adding a coagulant to caustic fine...
-
Conduction and Dielectric Relaxation Mechanisms in Oil Sands Influencing Electrical Heating
DownloadFall 2016
Electrical heating has been proposed in the past as an alternative to conventional water based thermal methods for reducing viscosity of bitumen in oil sands reservoirs. This could reduce or even eliminate water use and associated problems like inefficient heat transfer in the reservoir, poor...
-
Fall 2013
Bitumen, as one of the most important unconventional sources of energy, has long been an attractive source for production of liquid fuels. It is important to improve the yield and quality of the useful products resulting from bitumen upgrading processes so that the best outcome can be achieved...
-
Spring 2017
Achieving forest recovery on previously forested well sites in northern Alberta is an on-going challenge for the oil and gas industry. Thirty-three experimental oil sands exploration (OSE) sites were constructed and reclaimed between 2004 and 2006 in northeastern Alberta. Our goal was to...
-
Design, Simulation and Evaluation of Effective Industrial Information Systems: Case of Machine Condition Monitoring and Maintenance Management Information Systems
DownloadFall 2013
Industrial information systems can improve the management of industrial operations by providing relevant and timely information on the status of physical assets via condition and process monitoring systems, and by enabling the effective use of data by systems and processes that restore proper...
-
Spring 2015
This research aims to assist in the assessment of tailings management technologies through the development of a dynamic simulation model. The developed model (TMSim) incorporates the mine plan, various stages of dewatering including classification, pre- and post-deposition dewatering, and an...