Search
Skip to Search Results- 90Department of Chemical and Materials Engineering
- 32Department of Civil and Environmental Engineering
- 18Department of Renewable Resources
- 16Department of Mechanical Engineering
- 7Department of Biological Sciences
- 6Department of Earth and Atmospheric Sciences
- 15Xu, Zhenghe (Chemical and Materials Engineering)
- 7Liu, Qingxia (Chemical and Materials Engineering)
- 5Lipsett, Michael (Mechanical Engineering)
- 5Zeng, Hongbo (Chemical and Materials Engineering)
- 4Gray, Murray (Chemical and Materials Engineering)
- 4Masliyah, Jacob (Chemical and Materials Engineering)
-
Conduction and Dielectric Relaxation Mechanisms in Oil Sands Influencing Electrical Heating
DownloadFall 2016
Electrical heating has been proposed in the past as an alternative to conventional water based thermal methods for reducing viscosity of bitumen in oil sands reservoirs. This could reduce or even eliminate water use and associated problems like inefficient heat transfer in the reservoir, poor...
-
Control of D-Spacing and Graphitic Defects in Asphaltene-Derived Hard Carbons for Energy Storage
DownloadSpring 2024
With the increasing demand for energy storage and declining lithium stores around the globe, sodium is emerging as an alternative source due to its natural abundance and similar reaction kinetics and chemical properties to lithium. While sodium-ion and lithium-ion batteries started development at...
-
Spring 2015
This thesis presents a thorough examination of the corrosion and fouling behaviour of crude oil at refining conditions on industrially applicable heat transfer surfaces. The depletion of light sweet crude oil reserves means that the processing of ever heavier and more sour crude oils is...
-
Fall 2017
The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...
-
Fall 2014
The formation of stable water-in-oil emulsions during bitumen extraction poses problems for water separation from diluted bitumen, which leads to equipment corrosion and catalyst fouling in downstream operations. Demulsifiers are used to break the stable emulsions and assist the separation of...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...
-
Design, Simulation and Evaluation of Effective Industrial Information Systems: Case of Machine Condition Monitoring and Maintenance Management Information Systems
DownloadFall 2013
Industrial information systems can improve the management of industrial operations by providing relevant and timely information on the status of physical assets via condition and process monitoring systems, and by enabling the effective use of data by systems and processes that restore proper...
-
Spring 2016
The tendency of asphaltenes to aggregate in crude oil is observed at SATP and is enhanced at elevated temperatures. At these conditions, asphaltenes aggregation is a problem as it will ultimately lead to mesophase formation, a precursor of coke, known for causing plugging and fouling of...
-
Spring 2015
This research aims to assist in the assessment of tailings management technologies through the development of a dynamic simulation model. The developed model (TMSim) incorporates the mine plan, various stages of dewatering including classification, pre- and post-deposition dewatering, and an...