Search
Skip to Search Results- 1Abraham, Tinu M
- 1Adegoroye, Adebukola
- 1Afshar, Shima
- 1Ahmed, Nirob
- 1Ali, Babkir SM
- 1Amani, Mohammad Javad
- 105Department of Chemical and Materials Engineering
- 27Department of Civil and Environmental Engineering
- 13Department of Mechanical Engineering
- 13Department of Renewable Resources
- 7Department of Biological Sciences
- 6Department of Earth and Atmospheric Sciences
- 18Xu, Zhenghe (Chemical and Materials Engineering)
- 7Liu, Qingxia (Chemical and Materials Engineering)
- 6De Klerk, Arno (Chemical and Materials Engineering)
- 5Lipsett, Michael (Mechanical Engineering)
- 5Masliyah, Jacob (Chemical and Materials Engineering)
- 4Liu, Qi (Chemical and Materials Engineering)
-
Spring 2013
Solvents are ubiquitously used in oil sands extraction industry to enhance the separation of bitumen froth. With developing new technologies such as non-aqueous bitumen extraction, the need to track solvent interactions with oil sands components throughout the extraction process and to identify...
-
Spring 2011
Thin film pyrolysis was used to thermally crack the pendant groups from asphaltene molecules. The cracked products were rapidly quenched to minimize further decomposition. The liquid products were condensed and collected, with over 91% material balance on the recovery of gas, liquid and coke...
-
Trace elements in berries collected near upgraders and open pit mines in the Athabasca Bituminous Sands Region (ABSR): distinguishing atmospheric dust deposition from plant uptake
DownloadFall 2019
Bitumen mining and upgrading operations in the Athabasca Bituminous Sands Region (ABSR) may lead to increased concentrations of trace elements in the surrounding environment. Elevated concentrations of potentially toxic trace elements could pose a risk to local indigenous communities through the...
-
Spring 2015
Steam assisted gravity drainage (SAGD) method is the main oil extraction method in Alberta that produces a huge volume of waste water. This thesis is focused on investigating the viability of membrane processes, as emerging water treatment technologies, for treatment of SAGD produced water. Three...
-
Ultrasonic Characterization of Bitumen with Pressure and Temperature: Implications for seismic monitoring of the Grosmont Formation
DownloadFall 2018
The vastly untapped carbonate Grosmont Formation in north-eastern Alberta may hold in excess of a couple of hundred billion barrels initial volume of bitumen in place. Bitumen, an ultra-heavy hydrocarbon oil, possesses a density comparable to water, but a dynamic shear viscosity million times...
-
Fall 2017
Asphaltene is the most difficult fraction of bitumen and heavy oil to upgrade, as it has low H/C, high molecular weight and metal content. Asphaltenes are insoluble in paraffinic solvents, and undergo aggregation and coke formation during refining and cracking processes. No attention is usually...
-
Spring 2017
Interactions mechanisms of deformable air bubbles and liquid droplets play critical roles in many established and modern industrial processes. Understanding the interaction mechanisms of oil droplets and air bubbles is of fundamental and practical importance to solve many challenging issues,...
-
Understanding stability of water-in-diluted bitumen emulsions by colloidal force measurements
DownloadSpring 2011
Removal of emulsified water is a challenge in oil sands and heavy oil processing. The flocculation and coagulation of emulsified water droplets depend on the interactions between the water droplets covered mainly by asphaltenes and oil-contaminated fine solids. To quantitatively evaluate the...